Search results for query: *

We Always set the faxspeed on the fax at 9600 baud max.

Upgrade to 6.0. You can than use Location based dialing.

I just want restriction on EHDU from external. So only if you call the EHDU from public, and not internal.

When calling a number which has a PRG with a deskphone and a mobile (ehdu), on the display of the mobile is the default CPN presented. This is when the originating number send his number. When the originator doesn't send his number the display of the mobile presents Private Number. Trunk which...

The problem is resolved. I've sent the customer to a course "Listening is easy" Due to the behaviour of for example a 5330 the envelope works in to different ways. When off hook you get the nupoint voicemail message. When on hook you need your softkey to choose read messages. Also there was...

I'm not using any ports for RAD. I'm offhook when pressing the button. Some info: I have 12 channels I have three groups group 1 Voicemail line 1 to 7 (5240) group 2 Call director line 9 to 12 (5240) group 3 Record a Call line 1 to 7 (5240) MWI line 8 (5020) Before activating Record a Call...

When pressing the lit message waiting lamp nothing happens. The button doesn't ring the Nupoint. This occured after changing the Nupoint ports into 5240 due to expanding with Record a Call. MCD 5.0 SP2 Nupoint Build: 14.2.2.15.01

The choice of ISS is made because we use SIP for our client, and then it's cheaper than a controller. No additional hardware. @Loopylou: which embedded setup?

Hi, I have a mcd 5.0 on a ISS. The strange thing what happen is that I have a embedded voicemail license which is available for allocation, but I cannot allocate the license. Field stays grey. Does someone have an idea? Thanks, Ron.

Does anybody have a overview of which console software is supported on which mitel softwarerelease?

When we are logging in to the niu on ip, we get the prompt from niux. Can someone tell what's wrong, I'm expecting the normal login prompt. the niu cable is connected on the fourth quarter from the top.

Hello whosrdaddy, I can't agree with you, it works in BC9. But maybe you hit a point, I have to check the routes, because on the Bc9 MD110 I have separate routes for incoming, outgoing and bothway. I haven't looked at the routes on the BC11. Ron

Hello all, sorry for the late response because of workload, personal stuff and vacation. ACD and Profiles are no options because of System limits and Licenses. I haven't tryed the solution of lalrl, chancing the cnvtyp. If that works, Ericsson have changed the working of the nutri because it...

I want to convert an incomming number to an abbreviated dialing number (which is translated to an external number), but this doesn't work in BC11. It works in BC6.3.24 and BC 7.2 and BC 9.0. <nutrp; NUMBER CONVERSION DATA ENTRY CNVTYP NUMTYP PRE TRC NEWTYP CONT BCAP HLC 30291 0...

Hello, I want to find out if an extension has activated an external follow me and to what number. Is there a command to do this? Ron.

Hi Alchohaz It's working for me. I use the following lines. Prompt Response >login: SSSSSSSS; < MDUSER < XXXX The amount of SSS doesn't matter. Ron.

The books from sybex misses 2 subjects containing Nat and Rip V2, they talk about it briefly. On the exam for example you get a question how to configure Nat with commands, they aren't in the Sybex books but are in the Cisco book. Doiing my Exam this Saterday, my collegue did the exam last week...

We found a command Ctrl-T and that works in our case. Thanks for the replys. Ron

Hello, can I connect to a Siemens Hycom 340 via a router (telnet) using communicationsoftware like Reflection X ? It looks like I've connected the Pabx, but I don't get any response. Is there a keysequence to enter after I have connected the port. Thanks. Ron.

That's right I mean the Extension Manager from before DNA. I found out that the limit is set in the file emeasy.exe, I thought it was delivered from Ericsson when ordered the package. Does someone know how to change it?