Multiple Vlan on Catalyst 5505. DHCP on vlan 10, Cisco 2800 as SIP register server on vlan 40, UA (DHCP client) on vlans other than vlan 40 cannot register with 2800.
Switch port that UA connects to sees the register request, but no response; Port that 2800 connects to does not see this...
Good to know this post is still alive. The reason behind the scene is actually pretty simple. We have a lot Cisco vlan switches in the lab for each setup. We want to have a standard conf. Extra work is not an issue here.
Question is it does not work in the way as described. Can some one give a...
According to this:
When you boot your switch, the DHCP client can be invoked and automatically
request configuration information from a DHCP server under the following
conditions:
• The configuration file is not present on the switch.
• The configuration file is present, but the IP address is...
I am wondering if there is a procedure to achieve this. I need to do this in order to replace the current DHCP server on Windows 2003 server with a Windows 2000 server.
Thanks.
I setup a catalyst 5500 with RSFC. Inter-vlan is working since I can ping hosts on each vlan no matter from where ignite the ICMP ping. I even can map the Windows share across vlans although I am not able to list the files on mapped drive.
Problem is when I try to access a web server on a...
A few thoughts here:
Do you have a DHCP on the new network?
When you point PC on old network to use DNS on new domain, did you change the IP address on the old PC?
Is your new domain still a NT4 domain?
...
Hi, on my laptop with Windows XP SP2, I think it's after the installation of a software, the prompt to save from some applications is in French instead of English. For instance WordPad, when you close without saving, a window pops up with this message inside: Enregistrer les modifications...
Symptoms:
1. with DOS or Notepad windows activated, as soon as you press Ctrl key, the opened windows is closed without prompt of saving change. It acts as Ctrl+W
2. It's even worse within activated Windows Explorer. Most of the time, it crashes the Windows shell though the shell itself...
Three lines on screen is actially correct. I also want to have three lines (instead of two) when print.
If the graphic driver is poor, should it still show three lines on screen?
I tried to print the embedded excel object separately from Excel, the problem remains the same.
Thanks for your reply.
To me, the display settings is not suppose to effect printing. Instead, it may has impact on how the document is shown on screen. Because it's Word controls the layout and send the format information to printer driver.
^_^
Hi, I have a word document with inserted excel object as a table. In one raw of this table, I have a paragrah occupy three lines.
When print, I only get two lines with all the content. Tried to print same document from different computer, it's just fine. Also tried print to different printer...
From the PC has problem to access Internet, in command console, type "route print" to show you the routing table. Verify the default routing, you may have an idea what is going on.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.