Search results for query: *

Hey, Do you have a antivirus program? Run it with updates to see if there is a virus. This may be or may not! Hope this helps, JCS

hello, download this Ram tester from this website: www.simmtester.com (Put the bootable floppy in the floppy drive and boot up). You need the bootable version. you can take out all the memory and see if PC will boots up. also, if you have one PC100 128MB in one slot and another in the other...

You need new mointor!!! 17" KDS with two year warrenty about $150 and up. It will cost you more to get it fixed. Most people will charge up about $45 to just look at it. Hope this helps. JCS

Hello, Have you looked at CPU temp in the Bios? Many be something in Bios? Also, have you run a hard drive checker program in Dos? The hard drive manufacture *Like Western Digtal website for the checker*. Check the IDE cables to? Unplug all devices and booooooup. See if new memory will help...

Hello, I have sold many "Small Business" computers in the past. The PC that you would need for a "Small Business" will contain all of this features: *Intel Pentium 4 2.6 Ghz or 2.0 Ghz: (The 2.0 Ghz will be good for the job). *256 MB Ram or 512 MB Ram: (Most of the time...

Hey, Look i have disabled all start up programs. Run a virus scan with Norton 2003 and still didn't help. I have tried to reinstall windows me but that didn't help. Do I need to reformat hard drive? Thanks!

Hello, My Hpdskjet 940c prints but it is slow in printing. Up dated the driver form hp but still didn't help. Also, used the software to clean the heads and aglin it. This dose not help. The printer prints okay when printing doc. or txt.. Help if you can. Thanks!

I tried the drivers but it still wants PCI Communication Decivce. I think that there maybe a onboard PCI Decivce. What do you think?

Put a new PCI US Rob. modem in and boot. Windows found the modem and installed it. But when windows wanted to install PCI Communication Deivce drivers. I tried C:\windows\system but it didn't help. Also, tried to just let it find it but it wouldn't install the PCI Communication Deivce...

I have a (!) in decive manger for a USB Keyboard. The USB keyboard will only work in SAFE MODE. I have tried take it out and letting windows reinstall it but it still dosen't work. The (Num Lock) is on but when the windows screen come on the (Num Lock) goes off; this happens only in Normal...

I have tried the old memory in the PC and it still dosen't boot after i shut it down. I have to wait 20 to 30mins before it will boot agian. I think that it is haveing a Post problem? If i try booting the PC without the IDE cable connected to the motherboard it wants to run (Hard Drive). I...

The memory was a 96MB SDRAM PC100 and I Upgrade it . Took the 96MB out and put one 128SDRAM PC100 in and it booted. But when i shut down the pc and reboot the machine wouldn't boot. I waited 3mins and pc boot. Also, i had to replace the CPU fan. I just need the PC to boot up after shut it...

I upgrade the memory from 96 MB to 128 MB SDRAM. The problem started then after shutdown. When I tried to boot the PC it would not post. Cut machine off and wait 3Mins and PC Posted. What could be causeing the PC to not boot after just shuting it down?