Search results for query: *

are you using oem or remanufactured toner?

the paper out flag in tray #1 maybe missing or out of place. load 2 sheets of paper in tray #1 and print a 3 page document. (make sure you have no paper in tray 2) if the flag is missing or out of place you should get a paper jam, if its ok you should get "load paper msg"

there is a difference between engine speed and processing speed...complex graphics take a while to process.

i have seen that defect in other machines. i believe its called fish eyes..its common with remanufactured toner. its caused by contamination in the toner hopper or the toner itself.

look under printing preferences. machines should be set to fast res not pro res.

when the 740 is duplexing the paper does not come out the side. there is a solenoid that redirects the paper thru the door where you access the toner ctgs. i believe there is a flag there that hangs.. if you need more help i will try to send you a diagram

i think there is a sensor flag at the exit that hangs and causes that error. i am not to sure. give it a try.

this printer is driving me nuts...problem is herratic...printer will jam at exit, paper comes out about 1/2 way then it jams and suck the page back in about 1/4 leaving about 1/4 of the page out side. paper has cleared the transfix assy. any ideas. thanks

check paper size setting on tray....the back stop me be set to a different paper size.

are the drivers set to print at 1200 dpi...this will cut the print speed by 1/2.. making it 8ppm in 8.5 x 11 paper

left side of item, left side of menu

try to adjust the carriage to paper height....you will have to turn the torx screws that secure the carriage rod to the printer. do it in 1/4 turn increments...let me know if it works.