For some reason, all my grays in my documents are coming out tope with a green shade. Anyone have any clue? I played around with the color calibration settings but no luck.
If I were you I would check that the drivers are the correct ones for the printer and, if they are, then try a new cartridge see if that fixes it
Hope this helps
Open Drum drawer. Remove Drum. Clean density sensor on the front-inside edge of the drawer.
The carousel cartridge sensors may also be dirty. Remove top cover, left cover and blow out the two green sensor boards in middle of unit. It really pays to keep these unit CLEAN! They are messy, and that has a lot to do with problems.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.