Thanks, I'll try it next. But I'am afraid that my problem may be different, because in my case extension answers (hang-up) but you can hear nothing.
maraxman
T-Mobile Czech Republic
Hello,
it happens on our Conversants (version 9), that all ports on particular Dialogic board are mute even if there is application running on the port. (on "sysmon" it can be seen).
It helps switch-off IVR from power . Do you have the same experience? Is it way to find out this problem? Any...
You have to create two VLAN's. One for ip phones a second for a workstations. VLAN for ip phone has to be set as auxilliary vlan on Catalyst's port.
So there will be two different ip addresses. This schema is good to define diferent QoS for different VLAN's.
marax
maraxman
T-Mobile Czech...
when I'am using telnet to administrate definity, I use this key sekvences to "emulate" 513 terminal
key Escape is ^[
CANCEL: ^[ Ow
Enter: ^[ SB
PGUP: ^[ [V
PGDW: ^[ [U
HELP: ^[ Om
bye
maraxman
maraxman
T-Mobile Czech Republic
We have tried almost everything. X port does not work! only digital station with port assigned and telephone connected!! but this not really technical.
Hello,
can you help me? I need some kind of virtual station (with no hardware assigments) to park calls here, and then pick up them back with CTI.
We have contact centre from Genesys, and our Operators needs to make conference call for customers with external phones and then park it to keep...
Hello,
can you help me? I need some kind of virtual station (with no hardware assigments) to park calls here, and then pick up them back with CTI.
We have contact centre from Genesys, and our Operators needs to make conference call for customers with external phones and then park it to keep...
Hello,
I strongly disagree. We have ccm for two years and we are diappointed. Recently Cisco has promised, that with new wesion 3.3.3, we soled our problems that we had previously. But face to fact that curently ccm (3.3.3.) is for two weeks in unstable (because of SQL), they are panic still...
>Our network guys are dead set on using Cisco because they >like the idea of having one vendor.
This argument is their favorit. But are you using Cisco Network Adapter in your PC? No, and what about Cisco patch cords??
Important are the standards.
I am administrating Call Manager with only...
I have to agree with BuckWeet. Too much has been said to this. Check the archive of this forum, there are many details mentioned.
It is not really cost saving to throw away traditional PBx and start to build new system on cisco.
My nightmare of the last days was upgrade from ccm version 3.2. to...
another idea
Cisco cluster works only if active ccm totally fails (network fails). But this happened to me twice. ccm services works fine, but server for unknown reason was overloaded (server was uptime 22 days) Neither I could not connect from Terminal Services. This caused that you did not...
Sorry for misunderstanding. I did not mean that we had 40 ms latency, I meant that this latency is the maximal latency recommended by Cisco to have a servers in cluster. It was only limitation to do cluster over WAN (of course to have wide band line)
maraxman
T-Mobile CZ
Hello,
it was a LAN connection, but we had serious problem with pooling of datebases, and whole cluster crushed. Therefore they require to have ccm on the same switch. WAN cluster was our first dream! :) Never came true.
Bya
maraxman (formerly vokoun)
Hello,
does anybody have experience on Cisco CCM Cluster over WAN?. I am asking, because before we have bought CCM we were assured that they can do it. Now we have instalation of CCM cluster, but they do not want to support it! Technically there is only limitation of 40ms ping between servers...
Yes I know this feature, and I am using it, but i does not tell you which endpoints are connected together. (their IP and DN). Status station on Avaya traces voice stream (UDP) and signalisation (TCP) too. Easily from one command.
Other feature that I dislike is: ones Cisco IP phones boots from...
Thank you BuckWeet, that is the point!
We are big company, so I am not Network administrator to have rights to manage Cisco routers, but only PaBX admin, and it sometimes makes our work very dificult. It is not shame of CCM, but wrong concept. On Definity, one person, from one enviroment can...
Hello,
we have both IP solutions Avaya and Cisco, and for example this is one command that I really miss on Cisco CM: status station XXXX. I can see almost everything there: on hook, of hook, which codec is used for call, to which IP address is connection made, pakets rejected,jitter etc.
I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.