Search results for query: *

I am sure your hard drive is formatted as FAT or FAT32 and not NTFS. Compression is only available on an NTFS drive. To convert a drive from FAT to NTFS: Start>run>cmd "convert c: /fs:ntfs"

Try and swap the cables between the MAC and PC if you dont have a spare one and see.

Before we say is a faulty cable could you put a static IP address on your PC something like this: IP: 192.168.0.3 SUBNET: 255.255.255.0 Save the settings, do the ipconfig to confirm this is your new IP address, and then reping the Mac.

To run the ping command: click start, run, type: cmd click ok and type "ping 192.168.0.2" this will ping the mac and also confirm that your network cable is good, and let me know.

Ok, 169.254... is an IPIPA address witch confirms that the PC does not see the DHCP server. Also what is the OS of the PC? Try and ping 192.168.0.1, this is probably your router and let me know if you getting a replay. Also have you try my previous suggestion?

Usualy the manual of the router will give the factor default IP address of the router. What you need to do is: Go on your PC, click start, run, and type http://<the routers ip address> and click &quot;ok&quot; the you should get access to the router buildin software and enable the DHCP server...

Ok it looks like the dvive is OK to make it visable on my computer to this: Right click on my computer and choose manage, on the left hand pane click disk management, then on the right hand pane at the bottom where it says disk 1 or disk! right click and choose import foreign disk.

Right click the tackbar, click on properties, click on the start menu tab, click on customize, scroll down and take the tick off the &quot;Use personalize Menus&quot; click &quot;ok&quot;, click &quot;apply&quot; and your done.

As you already suspected the first think I will check is the PSU as it sounds very under power for a 2400+ and 1Gig of DDR plus a geforce4, hdd.... One more item to check, try and see if the graphic card is sitting probably.

Scotty, Could you give as more information on what you got hardware and OS PLEASE?

Yes Rambus memory or PC800 you always have to use it in pairs and you could only use identical modules. Like you could NOT have one 128mb module and one 256mb module. A pair is got to be same size, same type same manufacture.

Could you please give as any more info about the hardware, like motherboard make model, cpu, graphic card ...... If we have more info will try and help you.

Try this, Go to device manager click on the computer icon then click on action and choose “scan for hardware changes” This should do it.

Are the USB ports enable in the bios? Do you see them in device manager? Also in device manager on the USB tree do you see USB printing support?? Also check if the port in the printer properties is set to print to the USB and not LPT1

Ok, right click on my computer, manage, on the left hand pane click disk management, then on the right hand pane at the bottom where it says disk 1 right click and import foreign disk.

Hi, Ultra 160(also LVD) come in 2 different data connector formats, the normal one is the one with the 68 pin connector and the less common one is the one with the 80pin connector (SCA). When you order your new drive make sure your ordering/getting an ULTRA 160 drive with a 68pin connector and...