Search results for query: *

Okay figured it out. CUCM Admin> System> Service Parameters then pick your Server and Service is Cisco CalManager then go down to T302 Timer. Ours was set at 3000 so I changed it to 6000 to see how that works.

I’ve done a search and saw that link but I don’t see that menu in our CUCM. We are on version 8 and I’m in the CUCM Administration. Do I navigate to the CU Serviceability, CU OS Administration or stay where I’m at? Thanks

Where in the CUCM can I change the delay when entering the phone number on the phone? It busy out if you take to long entering the number and has become very frustrating to enter the number quickly. Thanks

I apologize; I have to hand jam it and was trying to avoid any unnecessary typing. There are no entries in the speed call list and here is the CLS: CLS UNR DTN FBD XFD WTA THFD FND HTD ONS LPR XRA AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD CFTD SFD MRD C6D CNID CLBD AUTU ICDD CDMD...

No one can help me?

Oh sorry, there is a phone out on the fence and to call one of us in the building they pick up the handset and dial #32 and 5030 rings inside our building, dial #33 and 5056 rings in our building or dial #34 and 5512 rings inside our building. I assumed the phone is using SCU since I saw it in...

On a Meridian Option 61C Rls 25.47 and I’m trying to get the speed call user working again on this one phone, the phone in question: REQ prt TYPE tnb TN 12 1 5 4 DATE PAGE DES DES 5125 TN 12 1 5 4 TYPE 500 CDEN 4D CUST 0 WRLS NO DN 5735 AST NO IAPG 0 HUNT TGAR 1 LDN NO NCOS 1 SGRP 0 RNPG 0 XLST...

Okay. Thanks

Can I make it part of the PBX environment, if so, how? Should I make it part of the PBX environement? Is there a reason that I shouldn't? Thanks

I would like to move the secondary clock source to the commercial E1(loop 24), we are using two T1s (loop 9 & 26) at the moment; what do I need to do, is it possible to have one T1 and one E1? CEQU MPED 8D TERM REMO TERD 010 011 REMD TERQ REMQ SUPL 004 012 020 N064 N080 V096 SUPC SUPF XCT 000...

So can I get the commercial E1 (loop 24) added to the clocking scheme, if so how?

We are trying to draw clocking from loop 24 a commercial E1, you know diversify.

CEQU MPED 8D TERM REMO TERD 010 011 REMD TERQ REMQ SUPL 004 012 020 N064 N080 V096 SUPC SUPF XCT 000 016 TDS *000 *016 CONF *001 *017 MFSD *000 *016 DLOP NUM DCH FRM TMDI LCMT YALM TRSH PRI 008 24 ESF NO B8S FDL 00 009 24 ESF NO B8S FDL 00 026 24 ESF NO B8S FDL 00 027 24 ESF NO B8S FDL 00...

Tried moving the clock and error popped up SCH0884. ?

Got it. I will figure out which two ports to use.

Cool Thanks

>LD 73 REQ: prt TYPE: ddb PREF 26 SREF 9 TRSH 00 RALM 3 BIPC 2 LFAC 3 BIPV 3 2 SRTK 5 30 SRNT 15 3 LFAL 17 511 SRIM 1 SRMM 2 ICS

It doesn't need the card number also just the loop number?

Will I have to change CC0 and CC1 in LD 73?

I have an Option 61. If I want to change the secondary clock source from loop 9 to loop 24 how would I do that? >LD 60 .ssck 0 ENBL CLOCK ACTIVE CLOCK CONTROLLER – TRACK ON LOOP 26 PREF – 26 SREF – 9 AUTO SWREF CLK – ENBL NO ERROR .ssck 1 ENBL STANDBY CLOCK CONTROLLER – TRACK ON LOOP 26 PREF –...