Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing the Clock Source

Status
Not open for further replies.

PhoneStar

Technical User
Mar 27, 2014
52
US
I have an Option 61. If I want to change the secondary clock source from loop 9 to loop 24 how would I do that?
>LD 60
.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER – TRACK ON LOOP 26
PREF – 26
SREF – 9
AUTO SWREF CLK – ENBL
NO ERROR

.ssck 1
ENBL
STANDBY
CLOCK CONTROLLER – TRACK ON LOOP 26
PREF – 26
SREF – 9
AUTO SWREF CLK – ENBL
NO ERROR

Thanks
 
You do it in lD 73 in the Digital Data Block. Then you will also have to move your clock cables.
 
It doesn't need the card number also just the loop number?
 
Correct. Print your DDB in LD 73 and you will see. The card number is not used in a 61.
 
>LD 73
REQ: prt
TYPE: ddb

PREF 26
SREF 9

TRSH 00
RALM 3
BIPC 2
LFAC 3
BIPV 3 2
SRTK 5 30
SRNT 15 3
LFAL 17 511
SRIM 1
SRMM 2
ICS
 
Got it. I will figure out which two ports to use.
 
Tried moving the clock and error popped up SCH0884. ?
 
Go to LD 22
Req prt
type cequ


and post

** Proofread carefully to see if you any words out.

 
CEQU
MPED 8D
TERM
REMO
TERD 010 011
REMD
TERQ
REMQ
SUPL 004 012 020 N064
N080 V096
SUPC
SUPF
XCT 000 016
TDS *000 *016
CONF *001 *017
MFSD *000 *016

DLOP NUM DCH FRM TMDI LCMT YALM TRSH
PRI 008 24 ESF NO B8S FDL 00
009 24 ESF NO B8S FDL 00
026 24 ESF NO B8S FDL 00
027 24 ESF NO B8S FDL 00
030 24 ESF NO B8S FDL 00
031 24 ESF NO B8S FDL 00
PRI2 024 025
DTI2
MISP 002 018 028
EXTO 3PE
CNI 012 000 000
EXT1 3PE
CNI 012 000 000
MCFN S0B0 S0B1 S1B0 S1B1 B2S0 B2S1 S3B0 S3B1 FLSH TOTL
016 016 016 016 000 000 000 000 64 128
 
In your current config, loops 8,9,26,27,30 and 31 would be your choices for clock source.


** Proofread carefully to see if you any words out.

 
We are trying to draw clocking from loop 24 a commercial E1, you know diversify.
 
So can I get the commercial E1 (loop 24) added to the clocking scheme, if so how?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top