Changing the Clock Source

[PhoneStar]

I have an Option 61. If I want to change the secondary clock source from loop 9 to loop 24 how would I do that?
>LD 60
.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER – TRACK ON LOOP 26
PREF – 26
SREF – 9
AUTO SWREF CLK – ENBL
NO ERROR

.ssck 1
ENBL
STANDBY
CLOCK CONTROLLER – TRACK ON LOOP 26
PREF – 26
SREF – 9
AUTO SWREF CLK – ENBL
NO ERROR

Thanks

 

[KCFLHRC]

You do it in lD 73 in the Digital Data Block. Then you will also have to move your clock cables.

 

[PhoneStar]

Will I have to change CC0 and CC1 in LD 73?

 

[KCFLHRC]

All you need to change is the SREF in the DDB

 

[PhoneStar]

It doesn't need the card number also just the loop number?

 

[KCFLHRC]

Correct. Print your DDB in LD 73 and you will see. The card number is not used in a 61.

 

[PhoneStar]

>LD 73
REQ: prt
TYPE: ddb

PREF 26
SREF 9

TRSH 00
RALM 3
BIPC 2
LFAC 3
BIPV 3 2
SRTK 5 30
SRNT 15 3
LFAL 17 511
SRIM 1
SRMM 2
ICS

 

[KCFLHRC]

There ya go, just change the SREF

 

[PhoneStar]

Cool Thanks

 

[KCFLHRC]

Don't forget to move the cables also.

 

[PhoneStar]

Got it. I will figure out which two ports to use.

 

[PhoneStar]

Tried moving the clock and error popped up SCH0884. ?

 

[Tacosoup]

Go to LD 22
Req prt
type cequ


and post

** Proofread carefully to see if you any words out.

 

[PhoneStar]

CEQU
MPED 8D
TERM
REMO
TERD 010 011
REMD
TERQ
REMQ
SUPL 004 012 020 N064
N080 V096
SUPC
SUPF
XCT 000 016
TDS *000 *016
CONF *001 *017
MFSD *000 *016

DLOP NUM DCH FRM TMDI LCMT YALM TRSH
PRI 008 24 ESF NO B8S FDL 00
009 24 ESF NO B8S FDL 00
026 24 ESF NO B8S FDL 00
027 24 ESF NO B8S FDL 00
030 24 ESF NO B8S FDL 00
031 24 ESF NO B8S FDL 00
PRI2 024 025
DTI2
MISP 002 018 028
EXTO 3PE
CNI 012 000 000
EXT1 3PE
CNI 012 000 000
MCFN S0B0 S0B1 S1B0 S1B1 B2S0 B2S1 S3B0 S3B1 FLSH TOTL
016 016 016 016 000 000 000 000 64 128

 

[Tacosoup]

In your current config, loops 8,9,26,27,30 and 31 would be your choices for clock source.


** Proofread carefully to see if you any words out.

 

[PhoneStar]

We are trying to draw clocking from loop 24 a commercial E1, you know diversify.

 

[PhoneStar]

So can I get the commercial E1 (loop 24) added to the clocking scheme, if so how?