Search results for query: *

Let me flash these back to SIP and give it a go. Thanks all

Aura CM 7.2.1 Can anyone offer up some basics on getting a j179 up and running on wi-fi? We've installed the wi-fi module, configured 46xxsettings per below and we are not seeing the wifi options offered after rebooting the phone and doing the mute\craft\# thing. ########## WI-FI SETTINGS...

All, Not confident that I am going to get an answer i will be happy with but here goes anyway. We are looking for a feature much like the per call CPN block\unbolck but without the per call bit. Basically looking to add a pair of cpn block\unblock buttons to a set of stations where the block...

We have an unusual request here for some patient observation carts we are looking to deploy. Basically the cart will be equipped with a camera and an SIP intercom (StentoFon). If the remote observer detects the patient is attempting to get out of bed, or is tugging at an IV or doing something...

you just told me everything i needed to know. Changed the "n" for all to "y" and we are again whole. THX display coverage path 7 COVERAGE PATH Coverage Path Number: 7 Cvg Enabled for VDN Route-To Party? n Hunt after Coverage...

trace is as follows: time data  09:24:23 TRACE STARTED 06/04/2015 CM Release String cold-03.0.124.0-21754 09:24:29 active station...

Recently began deploying Spectralink 84xx and 87xx handsets and have discovered when the phones are off the network or powered off, calls to the handsets return busy as opposed to following their assigned coverpath. Cover is honored when the devices are on and on the network. Im not even sure...

Having an odd issue here with a paging trunk and some 8400's. Basically the 8400 is able to dial the TAC and we hear over head the paging tone play. On the Spectralink side however we only hear continuous ring back? Curious if someone has some insight. Trunk configs below Group Number...

We have set up remote send call activate\deactivate to allow our console operators to effectively allow them to set patient room phones to a "do not disturb" state. Unfortunately the operators are in an ACD group as well, and, although the feature works perfectly from their stations when no one...

i am curious if there is a way in avaya land to replicate a rolm user experience when (avaya) parking a call. From my understanding, on the rolm system callers were able to press hold (which in avaya land actually parked the call) and inform (via page or shout) an individual to answerback the...

couple questions. first - does the distictive alert for internal\external calls on 96x1 series phones only work if classic ring tone is selected? SO far that has bee my experience. second - If first is the case, what is the 46xxsetting parameter that needs to be set to force the ring pattern...

Thx 4merAvaya. Unfortunately those options were all already flagged 'y'. We have also attempted to pull the stations out of the hunt group and instead set them up for station hunting. Still no love. When we call to the first station (former pilot number of hunt) the ID comes across perfect...

Anybody out there have any experience integrating an Avaya CM 6.2 with a dialogic D82JCT-EX? On the Avaya side we have programmed a hunt group with the member stations configured as either 7434 and 8434 (per recommendation from the application owners). Depending on the station type selected we...

We are looking to drop a couple remote gateways into oour core and would like to provide location specific DID intercept announcements ("you have reache a non-working # @ site x. please hang up and dial the main # @ xxx.xxx.xxxx"). Can someone point me in the right direction? Right now we...

TuTTY works well too and it has ATT513 emulation

you can also use the hardware manager under ASA's fault and performance tab. double click on the board you are interested in, then right click and select port usage.

I have a bank of 6 stations that need to be locked and unlocked throughout the day. The specific times vary from day to day. Today, there is a "control" station which has station lock\unlock keys assigned for each of the 6 stations (12 buttons total). With several more systems coming on...

Does anyone know if there is a way to get the 9611 to actually honor the blank button assignments on the station form. I have 2 features i want to fix to the last page on the 9611 but dont want to have to assign 22 pointless features