Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

is there a command to list the stations on a board? 5

Status
Not open for further replies.

bfordz

Technical User
Nov 18, 2008
91
US
I thought I had run this before but don't remember the command.
I just want to list the particular stations / extensions associated with a particular circuit board.

brad
 
OK, I was in too much of a hurry. I thought I had tried this...
list stat port xxxxx ; did some more searching and tripped over this.

brad
 
you can also use the hardware manager under ASA's fault and performance tab. double click on the board you are interested in, then right click and select port usage.
 
I didn't know that. Thank you very much for that added information.
 
[tt] With the 'list station port' command you can run the command for:

an individual port: list ststion port 01a1101
a single circuit pack: list station port 01a11
a carrier/cabinet: list station port 01a
or a port network: list station port 01

Kevin[/tt]
 
Thanky-you 4merAvaya, you taught me a new way to use the command, did not realize you can do more than a specific port.
 
Excellent; Thank you 4merAvaya for the additional commands.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top