Search results for query: *

Assign yourself on the same subnet as AVP and plug into the Lan on the gateway if you can. you will get this error 90% of the time using the services port to deploy. Even though it says it failed, everything works 100% fine FYI. A+|Security+|Linux+|ACSS CM/CMM|ACSS SM/SMGR|VCA-DCV

try custpw A+|Security+|Linux+|ACSS CM/CMM|ACSS SM/SMGR|VCA-DCV

Check the MID on the LSP. make sure there is no other servers using the same MID. A+|Security+|Linux+|ACSS CM/CMM|ACSS SM/SMGR|VCA-DCV

if this is a fresh install... Load the KS. Login as sroot. mount SM 6.3.10 CD. run "bash install.sh --factory" hook Monitor up to server to agree to EULA (will ping but, ssh will be disabled) run SMnetSetup A+|Security+|Linux+|ACSS CM/CMM|ACSS SM/SMGR|VCA-DCV

try using the full filename mm711h20v73.fdl

There is no way to speed this up on a s8300D it is what it is... the new system platform patch 6.3.4 is brutal, that alone takes about an hour.

I took it a couple of years ago. it was 70 questions. It definitely was the easiest out of the 3 exams. I believe you need a 67% to pass. I would use the CM 6 implementation PDF as a study guide. Good Luck

You could load 6.3 on a spare s8300D, and swap it with an LSP location with no issues. There is no licensing involved. as long as everything matches you should be fine. you can d/l a new auth from the RFA website under AFS Authentication File.

try uploading the original file vs the duplicate copy. notice the (1) in the filename at the end.

I've ran into a similar issue... and it was because of this patch CMM-03.0.124.0-0202. My recommendation would be to delete the CM template, re-install, and use CMM-03.0.124.0-0101 instead.

If you recently updated to the latest CM patch, this will cause this issue. Make sure you bring everything up to date. Including System Platform.

I know the backdoor address's are changed in CM 6.x. So idk if above post will work. You can download the FW to the utility server and use that ip Address instead. G450-001(super)# copy tftp module mm711h30v96.fdl <US ADDRESS> 3

at the end of the 30 days you will not be able to perform administrative changes in ASA unless you perform a reset system 4 to restart the 30 days.

you should apply ALL licenses to the System Manager WebLM Host ID on an MES.. When processing in PLDS choose the System Manager Host ID that you already processed the Session Manager Licenses on. Do not try to create a new License host for each product.

if you loaded AES on VMware Hypervisor, you need to deploy WebLM as a seperate OVA template or point the AES server to another WebLM server address.

is PE enabled at the core? what are your recovery timers set at?

is your mgc list setup correctly in the G430? are you using PE or CLANs at the core? What Version of CM are you running?

This would be my guess. http://downloads.avaya.com/css/P8/documents/100154640 what does your webLM license file date say?

look at your current station count in WebLM. and Just open the new license with and xml editor and look for new station count.

you have to run the "server" cmd from CM not CDOM use "xm console cm" then run the cmd "server" and paste results