Avaya S8300E AVP with US and CM

[pzvoip]

All - Need some assistance. I have AVP on S8300E in G450. The AVP is installed and fine. I tried (10 Times) to install the US VM on this and it hangs forever at the Running SANITY CHECK and then comes back with a Connection Error. The VM show failed to Deploy in current action on SDM Manager but in the web Vsphere client is shows it is running and i can get to the console. I read Support Avaya site and they are saying something with NTP. I changed in VSphere online client the NTP and disabled it then attempted again -same failure.

Please help>...?

 

[pzvoip]

Anyone have any thoughts on this?

 

[fondog2]

I have found that is it either the password or you do not have the US info populated in DNS.

 

[ken07734]

I have had numerous issues with deploying the VM's/OVA's in AVP. I personally found that I have to remove the VM and redeploy it. I have had occasion where I had to uninstall the SDM and re-install just to get the AVP to display the right state of the VM's. I think Avaya is still working out bugs in the background.... I also have had issues with the SAL VM not starting at all when deployed. On some of them I have had to go into the VM via SSH and start the services manually.

 

[SoundsLikeTheNetwork]

Assign yourself on the same subnet as AVP and plug into the Lan on the gateway if you can. you will get this error 90% of the time using the services port to deploy.

Even though it says it failed, everything works 100% fine FYI.

A+|Security+|Linux+|ACSS CM/CMM|ACSS SM/SMGR|VCA-DCV