AES Weblm error

[amoosh]

HEllo,

I just installed AES 6.3 on a VM and when I tried to log into the Weblm I get an error (Error Code: 404 Request not found).

Any help would be much appreciated.

Thank you.

 

[montyzummer]

I have just deployed this and it works fine what are you typing in the browser field ????

It needs to be like this

https://192.168.0.111:52233/WebLM

obviously 192.168.0.111 is my ip of weblm but you can use the FQDN, the important bit is the port 52233 and the /WebLM extension on the end of the address.

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[jmbailey]

We've got 3 AES pairs throughout our company and WebLM is working just like above fine. However, one of our pairs just starting throwing a similar error (generally it is a Timeout Error for the page). Haven't figured out what is causing yet.

 

[amoosh]

I just tried your suggestion but I was not able to open the WebLM page. Does it have anything to do with license?

Thank you.

 

[amoosh]

When I checked the service Controller page I see this " Application Enablement Service is not licensed in the license file". Is this related to the WebLM page issue?

Thanks you

 

[montyzummer]

Are you trying to access Weblm from AES or direct through the browser??

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[amoosh]

I tried both.

 

[amoosh]

When I do

https://192.0.0.1:8443

it takes me to the Management page and not to the Weblm page. When I add /WebLM it gives me the 404 error.

 

[SoundsLikeTheNetwork]

if you loaded AES on VMware Hypervisor, you need to deploy WebLM as a seperate OVA template or point the AES server to another WebLM server address.

 

[amoosh]

Where can I find WebLM OVA?

 

[amoosh]

Do I need to have a WebLM server for the AES?

 

[telcoguy]

make sure you address like :

https://xx.xx.xx.xx/WebLM/index.jsp

Some releases have a bug where the files are not startable in the directory, and you need to specify the exact file.
404 is just a "cannot find the page" html notification.

 

[amoosh]

I tried that as well but I can't seem to find a solution.

 

[montyzummer]

In answer to your question yes you do need weblm loaded as a OVA on your hypervisor , good advice from Soundslikethe network , i assumed you had already deployed this.


Here is the link

http://support.avaya.com/downloads/...contentId=C2013561630303600_5&productId=P0541

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[amoosh]

Thank you everyone. I am in the process of loading the WebLM.

 

[amoosh]

Do I need a license for the WebLM?

Thank you