Search results for query: *

The most common way into IPO units I have seen is the customer or installer not changing the security settings password from default. If you can get into security login you can change admin logins. I would say 70% do not change this log in info as I see it on out of service equipment all the...

Are you they were not referring to the DELL R610 server as well as the DL360G7 and just worded it poorly?

My personal experience when I get Test Mode to come up on Messaging with the Port card slotted either connectivity on the card slot is lose or bad. Or the port license card is bad. In this scenario which has only happened a couple times I would initially go with the license card. If you have...

You can also set the IPSI to receive the IP address automatically follow this link and and on PAGE 53 it will explain how...sorry easier than writing it out and don't worry its an Avaya doc http://downloads.avaya.com/css/P8/documents/100015876

Oops I put something completely different sorry

To use clear on 46xx while its loading hit * for program when it comes up and continue to hit # through all the ip settings DO NOT ENTER ANY NEW SETTINGS you will then here a beep after you confirm no new settings from there you will be asked to ENTER COMMAND (mute)27238 and # a couple times to...

^^^ Kevins right just hot-swap it out if your system goes down because of that then you probably have bigger fish to fry....you will need to busy out the board to clear announcements if the replacement has any on it.

Hi all Alittle before my time on this one but I am trying to test a 311A ISDN console. I have it programmed as follows TN754C, added attendant type: console , set to the first port, port is 4 wire connected through 1151A1 power brick. Screen lights up some functions work. My question is...is...

Thanks it is a 007 MLM 1.0 the old Legend Mail. Thank you for the link I followed some steps it worked!

Hello As I am sure this has been asked a thousand times but I havent seen a solution. Is there anyway to recover admin pw when connected via com port on mlm 1.0. Everything on this unit seems to have been replaced new hd and clamshell. So there is no visible serial numbers. I have also tried...