Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Getting a test mode message from Partner Messaging

Status
Not open for further replies.

Tripoth

Technical User
Jun 10, 2002
358
0
16
US
Partner Messaging 6.0
6 port card.


Rebooted phone system - NO Dice
Shut down system, reseated messaging card, pulled out the 6 port card and put it back in - no dice.

Any suggestions or what might be on the fritz?
 
Means voicemail doesn't see license. Make sure license is in left slot. If it is then license card or the slot is bad.
 
I've always found the port license card to be good, and the Messaging to have failed
 
Client had a brown out and this issue began occurring.
I think that would lean toward the voicemail being the issue, not the card?
 
My personal experience when I get Test Mode to come up on Messaging with the Port card slotted either connectivity on the card slot is lose or bad. Or the port license card is bad. In this scenario which has only happened a couple times I would initially go with the license card. If you have another port license card slot it and program and test again this will help help narrow down the issue.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top