Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. RotaryDialTommy

    SX 200 AX ICP>2 analog phones in a suite

    You have ruled out the phones , can the phones be called by other phones on site to verify the extensions are the correct ones for the rooms . Did you check programming to insure they have the correct tenant ?
  2. RotaryDialTommy

    SX 200 AX ICP>2 analog phones in a suite

    Have tested and verified these symptoms yourself . What trouble shooting steps have you taken if you verified symptoms . It could be as simple as a bad analog set or a split pair at the halftap with another port .
  3. RotaryDialTommy

    Mitel Speed Call Pause

    What we have here is a failure to communicate ! When the Mitel detects the call has answered it drops its resources to autosend dtmf .
  4. RotaryDialTommy

    General Mailbox does not record VM

    Your AA is not correctly set up .
  5. RotaryDialTommy

    Bets afotphone for a 3300 ICP 6.0 SP2 along w prairiefyre 6030

    The shortest route to hating your job is to set up softphones for corporate users !
  6. RotaryDialTommy

    SX-50 will not release lines.

    Yes you can turn off smdr . Try these commands in programming . Command Registar field 100 14 c-j 121 3 h 151 2 i 151 4 e Attendent Function *75 + 0
  7. RotaryDialTommy

    SX-50 will not release lines.

    Your smdr buffer may be filling up preventing call outs . Reseting system empties the buffer for a while .
  8. RotaryDialTommy

    Alarm Clocks

    More than one .
  9. RotaryDialTommy

    microphone button intermittent activation

    Try reloading the dnic card the 4025 is on . You can also swap dnics to see if the trouble clears .
  10. RotaryDialTommy

    3300 AX ICP>Embedded VM>Transfer Only Mailbox>External Phone Number

    Your system programming is incorrect . Testing your speedcall is not trouble shooting your problem !
  11. RotaryDialTommy

    3300 AX> VM Box digit length

    KwbMitel you have the patience of Job/Jobe . You are a good tech and a good man . Hats off to you !
  12. RotaryDialTommy

    3300 AX> VM Box digit length

    Does the mlaa work correctly when you press option 6 or 7 ? Have you verified that the recordings are in the direction mailboxes ?
  13. RotaryDialTommy

    Mitel MAS server not sync

    New hardware id and resync
  14. RotaryDialTommy

    Las Vegas Hotel Switches 1970's: Was the MGM Grand a Northern SL-1 Switch 1980 Fire?

    They had a NEC XBAR system . A 2400 I think .
  15. RotaryDialTommy

    loud crackling noise on calls/one way audio on calls

    I had been working on the Mitel line of PBX since the early 1980's . I liked their switches all the way thru the 2000 dark & light . When they brought out the 3300 , that's when I started to plan my retirement . It is very difficult to maintain if you cannot have access to the network it resides...
  16. RotaryDialTommy

    loud crackling noise on calls/one way audio on calls

    Nothing like a old ROLM 8000 or 9000 !
  17. RotaryDialTommy

    MODEMs over IP trunks

    I have been involved in Telecom/PBX since 1972 , I'm glad I retired last year . Tango I hope you are near retirement , it's only going to get worse .
  18. RotaryDialTommy

    ACD Group not working

    You need to add agent ext numbers to the agent group .
  19. RotaryDialTommy

    Enable user to dial internationally?

    Well at least after 23 days he can call the Dominican Republic . Well done !
  20. RotaryDialTommy

    SIP trunks.. NNI or UNI ?

    Why would they install those SIP trunks after you told them NNI is not supported ?

Part and Inventory Search

Back
Top