Search results for query: *

Thanks Draggaj for your answer. The thing is that because we are missing QSIG PKGs, i had to set the IFC to EURO . Could this be the problem? DGTP PRI2 ISDN YES MODE PRA IFC EURO CNTY ETSI This is a call trace from my nortel phone to a dn on the other side. Mine shows with the...

Hello We have a TIE connection between Nortel CS1000E Rls 7.5 and Audiocodes M3000 We use DSC to route the calls to the interconnect but at the other end it appears the national number: prefix+DN. How can I set it up to send on the route only the DN?

thanks Stanley it worked :) Strange are the Nortel ways. ok . these is my report. So,if I understood correctly it is programed to collect 365 days , between 23 and 22( theses means 24 hours), every day, in increments of one hour. It is that correct? So the prints of TFC002 it shows only the...

hello when i try do run those commands in ld 2 i get this errors .tshc 0 TFC200 .tshc TFC200 .*** OVL000 >err TFC200 > TFC0200 Syntax error. Illegal character has been input. Severity: Info Do I need to have some special package for this? OVL000 >ld OVL014 >ld 2 TFC000 .topc 0 TFC200 .

thanks guys it seems that the easiest way is to ask our provieder , but i'm afraid that if this request is not mentioned in the service contract it won't be resolved. Gene from what I have read in the Traffic doc, from witch I didn't understand much, that we need to activate the TFC002 trunks...

hello is there a way on how we can monitor the load on the route trunk channels?

hello Does anyone know how many maximum calls can be made on one CDN?

hi can you send us the result of the LD 60 > LCNT dch_nr command?

I have managed to make it work. We have configured the dch with IFC EURO , SIDE USR, the route is configured as TIE and the IFC also as EURO. The most importing part was that we set the clock on PRI that is connected to Audiocodes to get the clock from them. This way we eliminate the slips that...

Thanks I have a couple of questions: 1) Is the trunk type must be TIE ? We have defined it as DID. 2) The DCH SIDE should be USR or NET. If the IFC is EURO we cannot select this . It is default USR. 3) The guy from audiocodes asked me something about coding method. From what I've found in the...

Hello We are trying to interconnect Nortel CS1000E Rls 5.5 with Mediant 1000 from Audiocodes. First we tried using QSIG , but the only option for the interface type IFC is ISIG, but that didn't work. Then we tried EURO ISDN and the interface goes up but gives DTA300 every 2 sec and in the end...

thanks firebird unfortunately we don't have a test PBX. Any other ideas?

Hello Is there a tool that can verify the database integrity of a CS1000E rls 5.5? I am referring here if we can check if the database is corrupted or not.

hi all thanks for the replays. I have used Utreg method as is much easier; increment the variable until it reaches 10 and then reset it to 1.

We had a similar problem in the past. We have installed a CA backup agent witch runs as a service and blocked the RTD services. Did you installed some third party software on the CCMS server recently?

Thanks Utreg, I was on holiday this days. I'll test it and let u know.

hello is there a way on which we can route every 10th call to a different CDN? Let's say we have the main CDN for the main application and the 10th call from the PBX we want to send to a survey CDN. Our config: CS1000E Rls 5.5 with Contact Center 6.0 and MPS 500 as IVR system. Thx

we want to have a fail over solution in case one of our IPMG with PRI attached is down, other media GW can take the calls for it. I was thinking something like for example we have 4 E1 lines from the provider connected in hunting with the same numbering plan, 2 in one gateway and 2 in other...

Hello Is there a way by witch an E1 PRI or a group of PRI's can be set in a High Availability configuration?

thanks guys You are right. The callpilot ACD agents do not count in the license. I received a SR in witch it says that when you define a 2008 TN for callpilot you have to add CLS MMA for the ACD set to not interrogate the license file.