send 4 digits over TIE trunk

[marius1986]

Hello

We have a TIE connection between Nortel CS1000E Rls 7.5 and Audiocodes M3000 We use DSC to route the calls to the interconnect but at the other end it appears the national number: prefix+DN. How can I set it up to send on the route only the DN?

 

[Draggaj]

Your DSC will point to a RLI (Route List Index) that then contains the Tie Route number.
You can also add a DMI (Digit Manipulation Index) to the RLI that massages the digits.
In the DMI you can DEL n, where n = number of digits to delete and/or INST = nnnnnnnnn, where nnnnnnn(etc) is the digits to insert.
Sounds like in your case you want to DEL some digits....

 

[marius1986]

Thanks Draggaj for your answer. The thing is that because we are missing QSIG PKGs, i had to set the IFC to EURO .
Could this be the problem?

DGTP PRI2
ISDN YES
MODE PRA
IFC EURO
CNTY ETSI

This is a call trace from my nortel phone to a dn on the other side. Mine shows with the whole num plan. I want to transmit only 2226.

DCH 245 UIPE_OMSG CC_SETUP_REQ REF 0000230B CH 245 29 TOD 14:21:38 CK AC65CC03
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:213062226 NUM PLAN: E164 TON: NATL
CALLED #:1000 NUM PLAN: PRIVATE TON: UNKNOWN

This is the DSC. I try to delete 5 digits but still wont send only 2226

FEAT dgt
DMI 08


DMI 8
DEL 5
ISPN NO
INST 0
CTYP LOC