marius1986
Technical User
Hello
We are trying to interconnect Nortel CS1000E Rls 5.5 with Mediant 1000 from Audiocodes. First we tried using QSIG , but the only option for the interface type IFC is ISIG, but that didn't work. Then we tried EURO ISDN and the interface goes up but gives DTA300 every 2 sec and in the end it puts the PRI in OOS alarm and RLS the loop.
In every doc i found where CS1000 is integrated with 3rd party's PBX(CISCO, Audiocodes) the IFC of the D-Channel is ISGF witch is ISIG interface with GF platform. The ISGF can be defined if we had packages PKG 305 (QSIG Generic Function)
PKG 316 (QSIG Supplementary Services) but these aren't installed and we cannot install them.
Anyone has connected with other vendors using only ISIG/ESIG or EURO ?
thanks
We are trying to interconnect Nortel CS1000E Rls 5.5 with Mediant 1000 from Audiocodes. First we tried using QSIG , but the only option for the interface type IFC is ISIG, but that didn't work. Then we tried EURO ISDN and the interface goes up but gives DTA300 every 2 sec and in the end it puts the PRI in OOS alarm and RLS the loop.
In every doc i found where CS1000 is integrated with 3rd party's PBX(CISCO, Audiocodes) the IFC of the D-Channel is ISGF witch is ISIG interface with GF platform. The ISGF can be defined if we had packages PKG 305 (QSIG Generic Function)
PKG 316 (QSIG Supplementary Services) but these aren't installed and we cannot install them.
Anyone has connected with other vendors using only ISIG/ESIG or EURO ?
thanks