Search results for query: *

Hi! all 1) Can someone advise in detail the use of (SPU Not SPU2 or SPU4) card in MxOne TSW 2) Also the connections of TMU to provide music on hold

Thanks etampou for your input That means: 1) Connect one RJ45 to the center port SC0 (pin 3&6) SC1 (pin 4&5) 2) Connect other RJ45 to the second port EPP pair on pin 1&2 If I am not mistaking pin 1 starts from left when we hold RJ45 on a crimp tool I don't have directional antenna and I am...

Can anyone please advise on this issue how to connect EPP and which pair goes where.

I seek expertize to use maximum length of 1.9 km line cable (Cat 5) in installing a BS 340. How can I make use of extra power pair. What precautions should be taken in a rainy season.

What hardware and software needed to achieve. And what are the steps. please someone advise.

Hi ! So far havn't heard of anything like that. But there is a parameter for both Analog and Digital to stop MoH Aspac:parnum=154,parval=0; N.B. If you want to increase the parval value by 1 or 2, have to pull out TMU and re insert.

Thanx Dady, Problem solved Rfexied the system There was code 93 after failure of dump in LIM 2 with Add info 150

While dumping in a two LIM system, LIM 2 is giving sector handling error. Is there any way other than formatting the Flash(Syatem: TSW SP6)

Good day Mpe, you deserve a star for that. I knew for the command but logon was not in my knowledge. Thanks ! Is it possible to print by date rather a whole month.

It seems one of your RPN in FPI=4 is having intermittant problem ! Make ALREI; Keep watching for the alrm to reappear and take the print out for CXRFP:fpi=4,rpn=all; or keep printing CXRFP:fpi=4,rpn=all; Then figure out which RPN is having problem, check for cable connections or replace the...

Seek for guidance !

I followed all the steps mentioned in Alex to remove last LIM 26. When I sent command GJLIE, it says <gjlie:gsmult=0-13; NOT ACCEPTED LAST PCM-LINK <gjlsp:gsmult=0-13,print=all; GROUP JUNCTOR LINE STATUS EQU = 26-0-00-0 GS-MULT 0-13 GS SIDE 0 ACTIVE ACTIVATED...

you mean GHDAP:grp=all; Yes it is printing all hunt group, but what it is suppose to do with Group Call Pickup.

I have a problem with GPDAP in lim 20, it says wait....command lost. It is working all other LIMs. Also I can Initiate and remove members in LIM 20. I have checked the members tru current PC regen data and removed all members. But removing the GRP,it says members still initited. Restarted...

I have 26 LIM system. I have not erased any LIM from a system before. I have gone tru Alex for steps of erasure of LIM, that does not give an idea of GS. How to erase LIM 11 from this 26 LIM system (TSW sp2).