Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

GPDAP Command Lost

Status
Not open for further replies.

adminpabx

Technical User
Dec 29, 2010
15
MG
I have a problem with GPDAP in lim 20, it says wait....command lost.
It is working all other LIMs.
Also I can Initiate and remove members in LIM 20.
I have checked the members tru current PC regen data and removed all members. But removing the GRP,it says members still initited.
Restarted Unit GHH in lim 1, restarted unit GPP in LIM 20, no joy
SFCEI; RFLII:LIM=20 did not work
Any help will be appreciated !
 
you mean GHDAP:grp=all;
Yes it is printing all hunt group, but what it is suppose to do with Group Call Pickup.
 
Sorry what I meant was GHDAP:grp=xxx,dir=all. to see if any members of the group still exist.
 

Its a PICKUP group stripey not a GH, and it's software corruption, speak to your maintainer,

best parnum
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top