i am having a problem setting up time profiles.
if i use the for incoming call routing i would set default to go to AAbusiness_open and after hours MON - FRI 5pm to 7AM to go to AAbusiness_closed but it only goes to the default not the closed.
and if i use them for AA greetings and i set...
i have a problem with my 4 port analog trunk cards, where by when i install them they are not showing up. when i check in manager they show up as unknown. any ideas as to what can be causing this
i have a BCM4.0 at the head office and a BCM50 at the remote. i have a public ip on the bcm4.0 and on the remote side i have a router with the public IP and doing port fowarding to the BCM.
on the remote side i have a wireless brigde between two buildings connecting 5 IP phones to the BCM50...
i was finally able to simulate the problem but that now leads to a question. basically what was happening was that when users try making a call and if they press flash or press d hook button to quickly before putting in there passcodes the call goes on hold. when this happend it jus stays there...
that first link was the log file with the trace and this one is some print screens of the calls that are not disconnectinghttp://www.mediafire.com/?aqhg5nwkuvtrn8h
the system is a v2 chassis and the sofware version is 7.0.23
i have a trace and some print screen i could send you the trae is from over a weekend period and the print screens have the call that didn't disconnect on themhttp://www.mediafire.com/?cvbndtzl9ada41a
i have a problem with my trunks on an ipo. sometimes when the customer uses there account codes to make call the call remains active after all parties hang up. it happens on both the loop and ground start lines.. anybody ever had this one
This one is simple..can anyone tell me where i can get this for download...this thing is the hardest software to find...i got the license but no software was sent.
yeh it's a feature card mu-law...i have it in as it should be with the serial number facing up...i tried a different card same thing...i actually have a second system where the cpu light is orange and the c/f light flashing greena dn orange.. i think i'm gona give up on the first one... they are...
CPU Board Version is: 0xD0
CPU PLD Version is: 0x17
CPUID: 0x02 Present: 0x0C Present2: 0x02
Using FPGA build 0x00000817
Programming FPGA ...
FPGA ID 0x01 Version 0x01 Build 0x00000817
Initialising NAND device.. registering..
Added device: Hynix 64MB NAND (small block) - 0x0001
P13 Loader...
i tried doing the restrictoions like that to enter the code after i dial but i not getting the beeps it just rings but not actually connect..i didn't try sending the whole dial string with the account code to see if that works...will try and let you know...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.