Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. andyphones

    Can't select Merlin-network for PRI

    cvrbob, you were right, I neglected to set the LS/GS/DS1 programming for slot 5 to PRI. I appreciate your expertise.
  2. andyphones

    Can't select Merlin-network for PRI

    I'm trying to program a system for Magix networking, right now it is im my shop without a PRI line connected. There is a 100 DCD in slot 5. When I try to select a PRI switch type of Merlin-ntwrk or Merlin-PBX, I get the buzzer sound and does not take the selection. I notice it does take 4ESS or...
  3. andyphones

    Recording automated attendant greeting

    You need access to the system keyboard and video. You also need to know the password for the system. I think F2 was log in and then enter password. From there depends on which greeting you want to change
  4. andyphones

    Send emergency tone over loudspeakers

    I would look into the Viking Electronics Model DNA-510. Does some amazing stuff.
  5. andyphones

    LEGEND ALWAYS FRIES AN 012

    I have a school customer with a Legend R3 which every few months cooks an 012 with ring generator. It does have 2 extensions which go to another building on campus, but are not on this particular board and go through an OPRE. The board that fries is always the same slot. anything I can do to...
  6. andyphones

    Paging on IPO

    Glad to hear you got it working. Probably the level was too low for the WMT, the UTI1 has plenty of gain. Best to price out the job with a UTI and try the WMT at install. Can't go wrong with Bogen...
  7. andyphones

    Paging on IPO

    Actually, in the commercial sound world, CT stands for center tap. It is a connection on the halfway point on one of the windings. For this application you should not have to use it. The outer screw terms would go to your trunk or station on the IPO, the phono plug would go to an aux or hi-level...
  8. andyphones

    IPO 500v2 IP address

    this is a site I have never been to before, co has had mass firings and major downsizing, Looks like ip has been changed but no records available, that is why I asked about the dump. Are those ips in Hex. Customer also states that they had voicemail but when I push message button on phones...
  9. andyphones

    IPO 500v2 IP address

    Hello, I'm trying to determine the ip address of an installed IPO 500v2 to connect with manager. I have collected a dump from the serial port during startup. Which ip address would it be. I assume the printed ip address is in HEX??? Thanks !! ( should I use the Lan port or Wan port for manager??)
  10. andyphones

    Can I do this during the day??

    I have a customer with a MICS 6.1, and Callpilot 150. His main trunks are in the 2 cards in the core unit. There is a trunk module with one LS trunk cart which handles private lines. He wants caller-id on the PLs. Can I power down the TM, take out the LS card and move it over to the next empty...
  11. andyphones

    CP150/mini??

    Hi all: I have been testing this CP on my bench for the past week. It's connected to a MICS and seems to be functioning fine. From the looks of the GUI, it seems to be a regular CP. The software cart says Callpilot 150 3.1 so that maybe the determining factor....it has many greeting tables so...
  12. andyphones

    Information node

    Can callers dial extension numbers while in an information node??? Callpilot 150.......thanks
  13. andyphones

    CP150/mini??

    Greetings all. I am getting ready to install a CP150 for my customer, and find that it is labeled 150/mini. What will this system not have compared to a regular 150. Part numbers on the labels of the base unit are: NNTMH100DY4J andNTAB9626. This will work on a MICS, right?? From reading posts...
  14. andyphones

    NAM CCR trees

    Thanks Cook you just shed a ton of light on this issue. I will take a look tomorrow. Thanks again
  15. andyphones

    NAM CCR trees

    Good morning. I have a customer with a MICS and fiber NAM. Has PRI with DIDs. Have a couple of depts where the dept number rings into the NAM with a CCR tree ( not the main business tree) If a caller to the dept tree dials 0 or does nothing, the call goes to the main business operator. Any way...
  16. andyphones

    MICS 6.1 customer wants VM to email(blackberry)

    Greetings, I have a customer with MICS 6.1 and CP100, 12 sets, a couple of the users need VM to email on their blackberrys, etc. Would like to get a feel for what you guys would suggest.... non- Nortel would be fine with me....I heard that Avaya IP office is comming out with a board to support...
  17. andyphones

    KXTD1232 R4 off hook ringing

    I can't believe I am unable to resolve this issue. On a TD1232 Rev4, is there a way to allow an off-hook phone to ring on a new call? Phone is a Kx-t7433. Receptionist wants her phone to ring when another CO line is ringing. I have looked at the manuals in regards to call waiting, busy station...
  18. andyphones

    KX-TD1232 T!

    Turns out it was Verizon's problem......of course!! Thanks cwc3!!
  19. andyphones

    KX-TD1232 T!

    I have a customer with a TD1232 Rev 4 with T1....the T1 went down on Friday night, Verizon has replaced the smart jack and all should be well.....however, still have no channels available and no incoming calls, callers hear dead air. Lights on smart jack and CSU show good. Any diagnostics...
  20. andyphones

    ACS Driving me nuts

    don't have one,but will pick one up....

Part and Inventory Search

Back
Top