Search results for query: *

Its running on windows xp.My laptop can get ip from the ICP DHCP server but when I check the laptop ipconfig under Dos it has a subnet of 255.255.255.0 Does this matter?

-> version VxWorks (for Mitel MMC-C PPC82XX F2000) version 5.5.2. Kernel: WIND version 2.6. Made on Oct 25 2007, 12:32:39. Boot line: ata=0,0(0,0):/partition1/RTC8260 e=192.168.1.2:ffffff00 g=192.168.1.1 u=ftp pw=@ o=motfcc value = 101 = 0x65 = 'e' ->

ICP 192.168.1.2 Gateway 192.168.1.1 Note that this is the only gateway Subnet 192.168.1.0 bootChange is giving me the option to either boot the the ICP from its hard drive or from the Laptop.So which is which?

ICP 192.168.1.2 Gateway 192.168.1.1 Subnet 192.168.1.0 bootChange is giving me the option to either boot the the ICP from its hard drive or from the Laptop.So which is which?

kwbMitel & IrwinMFletcher I have a 5550ip console that is failing to work.Could you please go to the thread that iI have posted titled <Mitel 5550ip console not getting ip> & see if you can help.Im now desparate.

James & mitelsx2k I have a 5550ip console which is not operating.Could you please go to the thread that I have posted titled <Mitel 5550ip console not getting ip> & see if you can assist me please.

My ICP is on software v8 & my 5550 is v2,does this by any chance cause the 5550 not to work?By the way when I take out option 125 normal ip phones boot properly.So what should I make of that?The other thing is that my PC is on ip 192.168.1.150 subnet 255.255.255.0 but the 5550 has ip...

I had already turned it off just to test.Still the 555o doesnt want to work.What do you think is wrong with my 5550.If I give it a ststic address it doesnt work ,if the ICP assigns it a dynamic one it doesnt work again.In both scenarios the config wizard succeeds but when you open up the 5550...

You said sure use vlan_off command are you suggesting that for the 5550 to work the I shoul do vlan_off? Currently mine is on vlan_on.

Right now my 5550 is plugged directly onto the ICP lan port.No network to talk of.I need to get it working connected directly like that then I will be okay.I have tried assigning static ip then the 5550 fails to register.Just tell how you would do it if it were you connecting the 5550 right from...

brianmurindagomo@yahoo.com

Im using the Mitel DHCP server enabled.The 5550 is new from the box so is everything including the ICP.Im not sure what my options need to be apart from the ones above.Everything is working on default settings.On my previous installations I never had to change any option.

JimSmith how about you send me the whole of your manual?

vlan_off command.Then webbed the ICP & disabled the L2,then command vlan_on,followed by command reboot. 5550ip console still challenging.

My options are as below ID Name Value Format Scope Vendor ID ID 3 Router 192.168.1.1 IP Address Global 3 125 Mitel id:ipphone.mitel.com;sw_tftp=192.168.1.2;call_srv=192.168.1.2;dscp=46v46s26 ASCII String Global 1027 125 128 TFTP...

JimSmith & Bigsin thank you so much for your help my ICP is up & running you are each getting a star from me however my 5550ip console is still not getting an ip address from the ICP.Would love your input on this one too.

I was using the same laptop & same web browser no firewall before enabling the L2. Connecting to the right LAN port.Problem persisting.Response when input vlan_off

Ping no reply 4times

My laptop is using static ip 192.168.1.150.After doing the above process my web browser still wont display the page.Is there how I can just command the icp via the serial port to revert to the factory setting then I can start reprogramming because I hadnt backed up yet?

On the serial port I'm using Hyperterminal.Kindly guide me through how to enter the cmnd vlan_off.I would be very grateful.My life depends on it working soon.