Search results for query: *

Hi All, Please does anyone know how to enable call back between TSE and TSW? I have been trying to get this done and its just not working, I have callback working between all my sites running MXOne TSW sites. Below is my configuration on both systems TSE side DEST DRN ROU CHO CUST ADC...

thanks guys here's the nutrp hope u can understand it. In which of the routes is D24 the problem cosidering that calls from local site have correct display? <NUTRP; NUMBER CONVERSION DATA ENTRY CNVTYP NUMTYP ROU TARDST PRE TRC NEWTYP CONT BCAP HLC 40...

Thanks Daddy, 1)Both systems are MX-one Tsw (BC13 SP2). 2)It is outgoing calls that have problem. Phrankie!

The ADC of my ext is 010000301,I noticed that if i change the last digit to 0,i get a display of 08039074000 which is my pilot number but if i use 010000301 as the ADC on my ext i only get a display of 4144 instead of 08039074144,this only happens from my remote site,calls from my local site...

hi user25, i had a similar problem once,you can download and install portpeeker on the machine then configure the port to listen to(7000 in this case) as well as the ip address,you should be able to see your call log information. cheers! Phrankie!

Yes both systems are MX-one SP 2,after changing D17 and D25 to 0 there is no difference as call back is still not working. anything else i need to do? thanks again! phrankie!

thanks cpux, here's the roddp for the route <RODDP:DEST=41; EXTERNAL DESTINATION ROUTE DATA DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE 41 21 06061000000002501060000110 0 1 0 phrankie!

hi all, i have IP Trunks between two of my sites and i need to enable call back feature across trunks. how do i get this working? below is the route parameters at one end <ROCAP:ROU=21; ROUTE CATEGORY DATA ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 21...

@mdevo no i did not do any upgrade. @whosrdaddy i will do the measurement but assuming its the magazine as you mentioned, what should i do and how do i know for sure that its the magazine? thanks again! Phrankie!

thanks guys find below my alarms, @mdloser this is after CNREC command <ALLOP; ALARM LOG IDENTITY: NLNG-CON-OFF VERSION: CXP1010101/4/TSWSP02/R3A DATE: 22JUN10 TIME: 16:05:04 CLASS: 4 102 POWER FAILURE DETECTED BY DSU DATE TIME ALP NOIF EQU INF1 INF2 22JUN10...

no there is no red led, all led are green phranke!

thanks a lot guys for your help so far... @doktor, my power board is RG5DC??? @whosrdaddy i have pulled out the various boards one after the other,the alarm is still there. any more ideas? thanks Phrankie!

thanks doktor, if it is my ring generator shouldn't it affect the ringing of @ least some phones? there is currently no such cases,this is why i am wondering. thanks Phrankie!

Hi all, i have the alarm below in one of my systems, i have changed out the Power board,DSU,LSU and LPU5 boards but the alarm is still there any ideas on what i may be missing out? 102 POWER FAILURE DETECTED BY DSU DATE TIME ALP NOIF EQU INF1 INF2 04JUN10 08:15:17 3...

Hi all, i have VOIP trunks between two of my sites, one site depends on the other for its PSTN calls but the intersite PSTN calls have only 4 digits display while PSTN calls from the local site(site with the PSTN connection)has the full PSTN display. i have number conversion on both sites,below...

yeah!!! i finally got it, thanks a lot guys i'm very grateful,it worked yesterday, i used portpeeker and i got output,indeed port 21 did not work i used 3800. thanks again. Phrankie.

Guys, thanks a lot for all the help so far (sorry for delayed response), Please how do i make my server run as a telnet server or is there an alternative way around this? guess that makes the MD/MX the client right? 4give me bt i really need all the details as much as possible. Phrankie!

Thanks Doktor,after CLTGE the output is PASSIVE as shown below <CLTGI; NOT ACCEPTED CALL LOGGING ALREADY ASSIGNED <CLDFP; FILE ADMINISTRATION DATA FILE STATE NPPLOG ACT IODEV/PATH USER DEVICE STATE PRIORITY CIL-ETH CIL-0 PASSIVE A END. then after...

thanks Daddy, yes the application uses ftp and is listening, below is my current configs,is there anything else i need to do? IOEQI:IODEV=CIL-ETH,EQU=1-0-60-04,TYPE=NETWORK,USAGE=OUT; IONCI:IODEV=CIL-ETH,USER=CIL-0,IP=155.236.225.58,RPORT=21; CLDFI:FILE=NPPLOG,IODEV=CIL-ETH,USER=CIL-0,PRIO=A...

Hi all, i am trying to configure CIL over ethernet, i have done all the configs but when i print, my output is as below <CLDFP; FILE ADMINISTRATION DATA FILE STATE NPPLOG ACT IODEV/PATH USER DEVICE STATE PRIORITY CIL-ETH CIL-0 READY/NOT STARTED...