Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Back Over IP Trunks

Status
Not open for further replies.

phrankie

Technical User
Jul 27, 2009
44
NG
hi all,
i have IP Trunks between two of my sites and i need to enable call back feature across trunks. how do i get this working? below is the route parameters at one end

<ROCAP:ROU=21;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
21 0110100000000010 4 2110000007 0 30 128 03151515 011110121191 001100

<RODAP:ROU=21;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
21 TL65 H'00000001 H'00000001 H'00000000 NO

thanks for your help

cheers
phrankie!
 
print your roddp for the dest tied to this route
 
thanks cpux,
here's the roddp for the route
<RODDP:DEST=41;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
41 21 06061000000002501060000110 0 1 0


phrankie!
 
Assuming the systems you are connecting using IP networking are both MX-ONE/MD110, try setting ADC D17 and D25 to 0 instead of 1.
 
Yes both systems are MX-one SP 2,after changing D17 and D25 to 0 there is no difference as call back is still not working. anything else i need to do?

thanks again!
phrankie!
 
Working parameters in MX-ONE 3.2 SP4:

ROCAP:ROU=1;
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 7120000000000010 5 31100000010 0 30 128 00151515 011100100091 111111

RODAP:ROU=1;
ROU TYPE VARC VARI VARO FILTER
1 TL65 H'00000111 H'00000001 H'00000000 NO

RODDP:DEST=2;
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
2 1 060610000000025000600000000 0 1 0

Also check your extensions' SERV.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top