INCORRECT PSTN(NUMBER) DISPLAY

[phrankie]

Hi all,
i have VOIP trunks between two of my sites, one site depends on the other for its PSTN calls but the intersite PSTN calls have only 4 digits display while PSTN calls from the local site(site with the PSTN connection)has the full PSTN display.
i have number conversion on both sites,below is the route parameters for the local and remote site:

Remote site

<ROCAP:ROU=2;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
2 7110000000000010 7 3110000010 0 30 128 03151515 211100000031 001100

<RODAP:ROU=2;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
2 SL60 H'00000350 H'15400000 H'06004010 NO

<RODDPEST=84;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
84 2 06061000000002501060000110 0 1 0


Local Site

<RODDP:dest=49;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
49 47 00050000000002500000000000 0 1 0 87

<ROCAP:rou=47;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
47 7110000000000010 7 3110000001 0 30 128 03151515 211100000031 001100


<RODAP:rou=47;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
47 SL60 H'00000350 H'15400000 H'06004010 NO

does anyone know how i can resolve this?
thanks in advance for your help

phrankie!

 

[phrankie]

The ADC of my ext is 010000301,I noticed that if i change the last digit to 0,i get a display of 08039074000 which is my pilot number but if i use 010000301 as the ADC on my ext i only get a display of 4144 instead of 08039074144,this only happens from my remote site,calls from my local site have proper display.any ideas...


phrankie!

 

[whosrdaddy]

2 questions:

- what system do you have?
- is it outgoing in incomming calls that have the problem?

/Daddy


-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[whosrdaddy]

last question should be:

- is it outgoing OR incomming calls that have the problem?

Damn this site needs a edit button

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[phrankie]

Thanks Daddy,

1)Both systems are MX-one Tsw (BC13 SP2).
2)It is outgoing calls that have problem.


Phrankie!

 

[rfpui]

Can You send NUTRP printout?
use monospaced form plese

I thing that problem is in Route ACD for example D[sup]24[/sup]


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[phrankie]

thanks guys
here's the nutrp
hope u can understand it.
In which of the routes is D24 the problem cosidering that calls from local site have correct display?

<NUTRP;
NUMBER CONVERSION DATA
ENTRY CNVTYP NUMTYP ROU TARDST PRE TRC NEWTYP CONT BCAP HLC
40 1 10 37 0807018 0 0
41 1 10 37 0807018 0 0
42 1 10 37 0807018 0 0
43 1 10 37 0807018 0 0
44 1 10 37 0807018 0 0
45 1 10 37 0807018 0 0
46 1 10 37 0807018 0 0
47 1 10 37 0807018 0 0
480 1 10 37 0807018 0 0
482 1 10 37 0807018 0 0
483 1 10 37 0807018 0 0
844 1 10 37 0807018 0 0
40 1 10 38 0803907 0 0
41 1 10 38 0803907 0 0
42 1 10 38 0803907 0 0
43 1 10 38 0803907 0 0
44 1 10 38 0803907 0 0
45 1 10 38 0803907 0 0
46 1 10 38 0803907 0 0
47 1 10 38 0803907 0 0
480 1 10 38 0803907 0 0
482 1 10 38 0803907 0 0
483 1 10 38 0803907 0 0
844 1 10 38 0803907 0 0
40 1 10 39 0802473 0 0
41 1 10 39 0802473 0 0
42 1 10 39 0802473 0 0
43 1 10 39 0802473 0 0
44 1 10 39 0802473 0 0
45 1 10 39 0802473 0 0
46 1 10 39 0802473 0 0
47 1 10 39 0802473 0 0
480 1 10 39 0802473 0 0
482 1 10 39 0802473 0 0
483 1 10 39 0802473 0 0
844 1 10 39 0802473 0 0
4 1 10 50 0803 0803907 0 0
807 2 2 37 90 0
803 2 2 38 90 0
813 2 2 38 90 0
802 2 2 39 90 0
END

Wisdon is knowing what to do when you dont know what to do...
cheers!
Phrankie!

 

[rfpui]

I can try understand Your problem but
Q: who not have correct displayed number, remote or local site?
Q: extension 4144 is in local or remote site?
Q: NUTRP printout is from local or remote site?

If You send printout use MONOSPACED

http://www.tek-tips.com/viewthread.cfm?qid=898504&page=1

I have big problem to annalist NUTRP

And
RONDP:ROU=ALL;
Please


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)