problem with cil over ethernet 1

[user25]

i've tried to configure cil over ethernet in MXONE (NIU2)but
it dosn't work. please show me the mistake where it is.
I've done:

ioeqi:iodev=cil2,equ=1-2-10-4,type=network,usage=out;
ionci:iodev=cil2,rport=7000,ip=10.12.8.110;
cldfi:file=taxlan,iodev=cil2,user=cil-2;
clohi:file=taxlan,form=1,dmpsiz=1;
clodi:file=taxlan,dial=09;
cltgi;

i've also:
cldfp;
taxlan act
iodev/path user device state priority
cil2 cil-2 passive c

at th pc where i wante to get cil report i used HyperTerminal connection with ip adress 10.12.8.2 (NIU ip
adress) and number port 7000. the ip adress of the pc is 10.12.8.110

now when i try to open a connction i get a messge "imposible to connect to 10.12.8.2" however i can ping this adress from the pc!!

where is the problem???!!!

 

[whosrdaddy]

the problem is that the PBX acts as a telnet client and you need to setup a Telnet server. Hyperterminal is a telnet client.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[user25]

please what is the telnet server aplication you recomand me to use??
NB: i've a pc with XP os.

 

[cpux10]

To test, you can use HyperTerminal and in the call menu, select "wait for a call". When the first record arrives, you will get connected and receive the call records from that point on.

 

[phrankie]

hi user25,
i had a similar problem once,you can download and install portpeeker on the machine then configure the port to listen to(7000 in this case) as well as the ip address,you should be able to see your call log information.

cheers!
Phrankie!

 

[user25]

thanks phrankie i've used portkeeper it works well and very easy to configure it! thank you once again