HOW TO ACTIVATE CIL

[phrankie]

Hi all,
i am trying to configure CIL over ethernet, i have done all the configs but when i print, my output is as below
<CLDFP;

FILE ADMINISTRATION DATA

FILE STATE

NPPLOG ACT

IODEV/PATH USER DEVICE STATE PRIORITY
CIL-ETH CIL-0 READY/NOT STARTED A

END

Please does nybody know how i change the device state to started. there must be something i am missing.

Thanks!
phrankie.

 

[whosrdaddy]

Do you have an application listening on the correct TCP port on the computer with the ip address that is configured in IONCP?

/Daddy



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[phrankie]

thanks Daddy,
yes the application uses ftp and is listening, below is my current configs,is there anything else i need to do?

IOEQI:IODEV=CIL-ETH,EQU=1-0-60-04,TYPE=NETWORK,USAGE=OUT;
IONCI:IODEV=CIL-ETH,USER=CIL-0,IP=155.236.225.58,RPORT=21;
CLDFI:FILE=NPPLOG,IODEV=CIL-ETH,USER=CIL-0,PRIO=A;
CLOHI:FILE=NPPLOG,DMPSIZ=1,FORM=6;
CLODI:FILE=NPPLOG,ORI=8&&9;
CLTGI;

thanks!
Phrankie

 

[doktor]

Try to send the CLTGI; once more...

Or: CLTGE; and then CLTGI;

Otherwise restart FIP and NIP on the NIU board.

///doktor

 

[phrankie]

Thanks Doktor,after CLTGE the output is PASSIVE as shown below
<CLTGI;
NOT ACCEPTED
CALL LOGGING
ALREADY ASSIGNED
<CLDFP;
FILE ADMINISTRATION DATA
FILE STATE
NPPLOG ACT
IODEV/PATH USER DEVICE STATE PRIORITY
CIL-ETH CIL-0 PASSIVE A

END.
then after
<RFPUI:LIM=1,UNIT=FIP&NIP;

RFPUI:LIM=1,UNIT=FIP&NIP;

SURE? (YES/NO)

<Y;

it returns to READY/NOT STARTED as shown below
<CLDFP;

FILE ADMINISTRATION DATA

FILE STATE

NPPLOG ACT

IODEV/PATH USER DEVICE STATE PRIORITY
CIL-ETH CIL-0 READY/NOT STARTED A

END

what might be responsible for this?

Thanks!
Phrankie!

 

[whosrdaddy]

euh ftp?

you need some sort of telnetserver listening on the defined port. The pbx will send the cil strings in clear text, this will not work with ftp.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[doktor]

... Otherwise you cannot start the service in the MX/MD...

///doktor

 

[phrankie]

Guys,
thanks a lot for all the help so far (sorry for delayed response),
Please how do i make my server run as a telnet server or is there an alternative way around this?
guess that makes the MD/MX the client right?

4give me bt i really need all the details as much as possible.

Phrankie!

 

[whosrdaddy]

indeed, the pbx acts as a client.

there are loads of free telnet servers to find on the net.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[phrankie]

yeah!!! i finally got it, thanks a lot guys i'm very grateful,it worked yesterday, i used portpeeker and i got output,indeed port 21 did not work i used 3800. thanks again.

Phrankie.