Hello, I'm trying to find information regarding max Watt on the Barracuda Web filter 410 and the Barracuda Spam Firewall 300. I've Googled and hit Barracuda's website but can't find any documentation on figuring out the max wattage to find the BTU for these devices. Does anybody have teh...
I have a system that is monitoring my network. It uses a couple of HDTV's as monitors. The boss wants to be able to see the data at all times therefore, I can't use a screen saver per se. I have heard of an application that will move the desktop image slightly to avoid damaging the TV's...
I need help with a solid solution to backup a 120GB exchange database to optical media. The backup will need to restore the database from the media. I am thinking of using BlueRay but what backup software could span this large database across multiple disks while maintaining the integrity...
Yes I did - unfortunatly though everything else decided to use that NIC as well. So it worked but I lost connection to Network A.
I did find the solution though.
It is to disable all protocols except for VMWARE protocols. Bridge the physical NIC 2 to the VMNIC so the VM gets the DHCP...
I have a challenge I am researching and I wanted to throw this out there to even see if it was possible. I manage a small campus network but in the small campus are 2 seperate autonomous networks. I can not join them together but I do need to monitor both.
I have patched both circuits to...
Thanks for the response. Apparantly when the *.nk2 file is corrupt or deleted Outlook just scrubs it and starts a new file. There is nothing there to recover. I did try a system restore but that didn't work either. All well, hope they learned their lesson. Comical that I got a slight...
Anybody know of a way to recover the MS Oultook autofill cache file? We have a user that relied on the cache for their contacts instead of using their address book. Since Outlook has started a new cache does this mean the old *.nk2 file no longer exists? Thanks for any help on this...
I have no idea wher to pose this question so I will place this in a few areas so forgive me for multiple posts.
What we are doing is using Active-Active failover on two Cisco ASA's. The goal is to load balance across two Internet providers including all incoming and outgoing Internet, and...
You wouldn't happen to have the ISBN number for the ASA essntials book? I searched but could not find.
Network+ / Security+ / C|EH /CCNA
Working towards CCNP and CWNA.
That doesn't sound very encouraging! yes, that is the guide I have been using. Lucky for me I have plenty of time to get work with this as we are still on XP 32 bit for near future.
Network+ / Security+ / C|EH /CCNA
Working towards CCNP and CWNA.
I was trying to avoid extra hardware since this is only a short term solution. We are re-building the entire production network from the ground up and being able to advertise routes across the point to point VPN would help determine the steps involved. I'll look at the static neighbors...
Does anybody have resrouces for a straight forward tutorial on configuring Any Connect on an ASA5510? I've read and re-read the administrators guide from cisco's website, tried the install wizard and have had no luck in getting this feature to work. Help!
Network+ / Security+ / C|EH /CCNA...
This may seem like a dumb question but I am having a design issue. Can EIGRP advertise routes across an IPSEC VPN point to point tunnel? I know I can configure EIGRP on the ASA and advertise the configured networks but will those EIGRP routes be advertised to the other side of the IPSEC...
I noticed your previous config set VLAN1 address to 10.1.1.116 but you did a ping to 10.1.1.115.
Is there a typo somewhere?
Also, maybe try to back out of the local login and set the password for telnet. i.e
switch(config-line)#no login local
switch(config-line)#password...
Your config looks like it should accept telnet sessions.
Can you ping the swtich?
If not do you have a DHCP server somewhere or did you set a static address on your workstation?
Check your cables? Is the port active, auto-duplex/speed match NIC on workstation - (switch#show interface...
here are some fairly clear directions for you;
http://www-tss.cisco.com/eservice/compass/common/tasks/task_console_port_connect.htm
The problem you are having is noted at the bottom of the page. Be sure you are using the correct cable is what they are saying.
have fun!
Network+ /...
Forgot to mention my source; http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806745b8.shtml
Network+ / Security+ / C|EH /CCNA
Working towards CCNP and CWNA.
Maybe check the policy maps on the PIX and disable any ESMTP filters?
ESMTP TLS Configuration
Note: If you use Transport Layer Security (TLS) encryption for e-mail communication then the ESMTP inspection feature (enabled by default) in the PIX drops the packets. In order to allow the e-mails...
First of all, let me say I have very weak exchange skills so bare with me.
The quick version:
OWA works ok for everybody but users in a single department.
With the user logged in, they can get the OWA login page but when they input their credentials they get a page can't be displayed...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.