Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Point To Point VPN and EIGRP

Status
Not open for further replies.

w4nn4b1337

IS-IT--Management
Apr 14, 2009
42
US
This may seem like a dumb question but I am having a design issue. Can EIGRP advertise routes across an IPSEC VPN point to point tunnel? I know I can configure EIGRP on the ASA and advertise the configured networks but will those EIGRP routes be advertised to the other side of the IPSEC tunnel?
Thanks


Network+ / Security+ / C|EH /CCNA
Working towards CCNP and CWNA.
 
i've never tried it with eigrp so i'm not 100% sure if it can or not. i know you can configure static neighbors within the eigrp routing process itself, but i don't know if it will work. is it possible to add a couple of cisco routers to your design and run a GRE over IPSec tunnel??

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)
 
I was trying to avoid extra hardware since this is only a short term solution. We are re-building the entire production network from the ground up and being able to advertise routes across the point to point VPN would help determine the steps involved. I'll look at the static neighbors.

Network+ / Security+ / C|EH /CCNA
Working towards CCNP and CWNA.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top