Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2 NICs One PC - Homebuilt NOC monitoring 2 seperate networks

Status
Not open for further replies.

w4nn4b1337

IS-IT--Management
Apr 14, 2009
42
US
I have a challenge I am researching and I wanted to throw this out there to even see if it was possible. I manage a small campus network but in the small campus are 2 seperate autonomous networks. I can not join them together but I do need to monitor both.
I have patched both circuits to my homebuilt NOC monioring server. It does have 2 GIG NIC's and the system is running WIndows 7.
I don't think it is possible to have 2 seperate gateway's on this system and that is not what I am trying to accomplish.
What I am trying to do is Use NIC 1 to have the host operating system use Network A and then use NIC 2 to map strictly to a VMWARE Workstation virtualized Windows7 system to monitor Network B.
However, the Gateway problem persists. I can not get NIC 1 to use Network "A" and NIC 2 to map only to the VMWARE host. It is one or the other. Is it possible to monitor 2 autonomous networks with one system this way? Your thoughts and comments are appreciated.

Network+ / Security+ / C|EH /CCNA
.
 
Yes I did - unfortunatly though everything else decided to use that NIC as well. So it worked but I lost connection to Network A.
I did find the solution though.
It is to disable all protocols except for VMWARE protocols. Bridge the physical NIC 2 to the VMNIC so the VM gets the DHCP address instead of the physical network stack.
NIC1 stays on Network A and NIC2 can not bind to TCP/IP or anything else but the bridged VMNIC. Once the VM is powered up, it sees the bridged NIC and passes the DHCP assignment from Network B. WOrking like a charm

Network+ / Security+ / C|EH /CCNA
.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top