before you even start on the phone, make sure your routing is good.
Can you ping from the remote subnet to the IP Office?
No.
Can you ping from the local subnet to the remote subnet.
Yes
Can you ping from teh local subnet to the remote subnet using the IP office as a gateway?
(I am remote - how...
From that remote network can you ping the address of the IP Office?
I cannot ping the IPO from the remote side... only when I connect directly.
this world is new and i'm seeing red...
ok so when you set up your phone the call server will be 192.168.0.5. then the file server will be 192.168.0.10.
yes
this world is new and i'm seeing red...
Installing a new ip 5610 phone. I have VPN setup pix 5505 point to point. TFTP server 192.168.0.10 IP Phone (56xx) set to 0.0.0.0 The phone starts downloading all necessary software after downloadind i10d01a8_016.bin the phone ask for an ext. number and get stuck at Discover 192.168.0.10
this...
can you post your shortcodes?
Site A SC
sc:4XX
F:Dial
TN:4XX
LG:80
sc:5XX
F:Dial
TN:5XX
LG:80
sc:6XX
F:Dial
TN:6XX
LG:80
Site B SC
sc:3XX
F:Dial
TN:3XX
LG:80
are you pointing the call over the line group id of the ip lines?
Ans: Yes
Now when I dial and 5xx or any other extention I get...
IP Office 500 4.2.4 on both ends of a VPN tunnel. The extensions at site A begins with 4xx and site B 3xx.
I want to create an ARS so when the VPN is down site A location dials a 1-800 number and is connected to site B’s auto-attendant.
After testing all goes well except, when the VPN is...
***when the phone rings and secretary pick up... she goes hello about twice or three times before the party on the other end can hear her...
***When she makes a call and the other party picks up, she goes hello twice before they can hear her...
this world is new and i'm seeing red...
1- Cable internet 7meg to central site, centrale site 100mg internet connection.
2- 4 IP phones on site
2- Latency 8-11ms between each site through VPN Tunnel 3-Device= Multitech RF 830 both sites
4- Linksys POE switch
*Happy B'Day Jamie*
this world is new and i'm seeing red...
...thank you to all don't mean to be repeating... I do search the forum before asking... just so overwhelm (more questions to come:-)
this world is new and i'm seeing red...
Incoming call route to VMPro module, to menu with press 1 for sales, to variable routing to capture CLI, then transfer to appropriate extension. I have to do this for every area code in the US. The variable routing only allows 14 entries then it is grayed out. Can you guys think of anything else...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.