Search results for query: *

the floppy you need in the install disk which will boot up to a menu with an option to reload the software from CD(you will need the keycode file)

Take a printout of the TN in question and see what is turned on or compare it to one of the other messaging ports

Thanks, I have DKA 9.0 but it does not work with CS1k rls 6.0. Does the 9.2 work with rls 6? And if so do you know if it is still available?

Can someone tell me where I might find the latest version of the DKA (LabKeycodeViewer)software? I have searched the website with no luck.

Rlogin uses port 513

Are you using NTP to sync time?

IDEF" must = yes in LD 15 FTR to allow INT or EXT in RDB.

You must activate flexible numbering plan. FNP = Yes in LD 15 (Net)

Thanks Bignose21, I was wondering if it may be normal but I thought it would check as I haven't seen this setup before. It would be nice to have a more friendly indication such as "local mode".

The reason they are registering to ACS1 is because I forced them to as a test to determine if the feature is working. The geo redundancy was just added recently and we needed to know that it works.

I have a CS1000 with a survivable media gateway configuration. When IP sets register to the alternate call server the display shows "INVALID ID (3)". There seems to be no malfunction the sets can make and receive calls. Just wondering.if anyone has come across this and knows how to get rid of it.

did you program the 32 dsp ports?

sounds like you have loop start lines which are not providing a disconnect, so the voicemail is not dropping the line after the caller hangs up.

This is being done by CLI Fletch, After I answered yes to FNP in LD 15 I was able to set the MXRL to 999 and then able to build RLI 911.

According to docs the max is 1000 with PKG 160. I have found the answer, FNP - yes in CDB

I am trying to build route 911 for e911,I have tried to up the MXRL setting in LD 86 to 999 but I get an ESN035 error. I do have package 160. What am I missing?

tnjwinters Did they change to MSNV in the CLS?

I currently have a site with the same issue, the DSP's are fine and if the far end calls the TDM device via SIP there is talk path. I have also found that intermittently if you wait a few seconds on the TDM set you do get talk path.

250 MB is probably not enough I think it will need about 500MB. Delete all temporary files in c:\ and anything in C:\prefetch folder. You will probably want to remove the antivirus as well.

137.135.128.257 is not a valid IP address,that is why it failed. The valid addresses in this subnet would be 137.135.128.1 to 137.135.128.254