Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change MXRL value

Status
Not open for further replies.

xinnam

IS-IT--Management
Sep 25, 2008
26
CA
I am trying to build route 911 for e911,I have tried to up the MXRL setting in LD 86 to 999 but I get an ESN035 error. I do have package 160. What am I missing?
 
tried a lower number besides 999? like uping it to 200, 300, 500???

Mato' Was'aka
 
ESN0035 Maximum number of route lists out-of-range.
Action: Increase MXRI.
Severity: Info. Critical to Monitor: No. SNMP trap: No
 
According to docs the max is 1000 with PKG 160.

I have found the answer, FNP - yes in CDB
 
This is being done by CLI Fletch, After I answered yes to FNP in LD 15 I was able to set the MXRL to 999 and then able to build RLI 911.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top