Search results for query: *

Thanks kyle555 for your reply. That I'm not 100% sure, It more than likely could be. I see there's another restore option from another server, I wonder if that runs some script changes for old local machine name to new host? I had just seen that option after doing the standard restore process...

Hi all... I have an instance of Avaya One-X Attendant (R4.08), in which we're trying to restore from a backup to a new machine. The old machine is unstable periodically drops. We installed the exact same load of one-x attd on the new machine, put backups in correct directory, and then ran the...

We're utilizing g450s w/MP160s for DSP. I appreciate your responses, I'll post some feedback after we complete the testing with some of the suggested settings from the thread.

Thanks kyle555, I will change the ip codec set in my test NR to t.38, the carrier did say they supported t.38-g711 fallback. Customer also stated that they have very old fax machines, so t.38 may be the route needed. I follow you on the t.38 to core and then relay out after that. I may try...

Hi all, we have a customer on newly installed Aura CM7, with R7 session managers and Avaya SBC-E. Inbound calls, voice quality all working well. Around 1400 endpoints, mixed environment of H.323 stations and analogs. As an Avaya BP, we've never deployed a non-fax server solution across SIP...

Hi all, wanted to provide a quick summary of our resolution. So in the end, we did have to add QSiG/H.323 tie trunk to the CM3. So CM6 core is now QSIG tie trunked to the CM3. Once we had 4-5 test stations' MWI working (I had to put these individual ext entries in UDP/AAR), then we knew we...

We recently upgraded a fairly large CM, and I believe there were some different CM loads on the LSPs in our config. I believe the core was 6.1 and there were some 6.0 and 6.2. Just another note to add to the mix.

Thanks for all of the feedback everyone. Quick update, we now have correct integration going from CM3 back to CM6 over SIP trunk to CallExpress voicemail. Our last hurdle is just getting the MWI working over the QSIG/h.323 trunk. We've got the CM3 message center hunt group set up as qsig-mwi...

Customer that has a CM6.0.1 using direct SIP integration to AVST CallExpress 8.1 voicemail platform. All phones on the Core CM work properly, but there is a standalone CM3.1 that is using h.323 tie trunk back to CM6 core, MWI is not working on those stations after the upgrade to SIP...

IF its registered to procr, thats your processor ethernet interface. You can do a display ip-i procr (ip-i short for ip-interface), that will show you the procr ip address. Let me know if that helps?

Hi all, just wanted to quickly reply to your posts. We've opened up a ticket with Avaya's servers groups and also the CM group as well. They're currently researching and troubleshooting, as we've identified the exact same issue with our in-house AAM as well. We did consult the config notes...

Good morning... We have a customer with CM6 and Aura Messaging 6, with direct SIP integration, that wants to utilize outcalling for a critical oncall scenario. Customer uses standard PRI for outbound/inbound trunks in CM. Currently in our testing, the outcalling or Reach Me feature...

Thanks amriddle01, just installed an 8.1 with 80+ 95xx sets and it appears they have a couple with the "Please Wait" freezing symptom. Using your link to pull down 8.1.65 and we will upgrade later in the week to see if the firmware upgrade resolves the issue.

Hi All, we were able to locate the source of the problem. There was what appeared to be one way RTP across the SIP trunk do to an incorrectly programmed default gateway address in the g450. We corrected that issue and it is now resolved. Thank you for your posts and information, and you were...

We have customer using 96xx ip sets on new CM6 with SIP integration to Session Manager for MM/voicemail capability. Internal calls working properly, message waiting lights/recording works properly. When dialing from any external number, call covers normally to subscriber's voicemail box, but...

Thanks Avayatier3, I learned something today from your post on the dup command.

Do you currently Avaya Site Administration to access the PBX? If so, ASA has a utility under General tab, called Find Unused Extensions. It will poll the system for dial plan and extension ranges and then will do a search for you for unused extensions based on the settings of your query. You...

Hi all, we have customer with Avaya CM, 5.2.1 (s8730s main) with a g450/s8300D LSP located in Phillipines. 2 E1s configured in this LSP location, experiencing outbound dialing issue on 2nd E1. Trunk group is configured and in service, Sig group is configured and in service. Inbound calls are...

Thanks Bas1234. We checked DPD on VPN router and it isn't enabled. We have a ticket open with Voda, investigating 7.0.5 issue and potential network issue as well.

I have a customer with ip500v2 control unit, R7.0.5. All phones on the system are 9650 ip sets in vpn mode. No limitations with licensing or anything. Recently, they've had 5-6 of these phones just unregister and lose vpn functionality randomly. The individual VPN tunnel is lost, and the...