Search results for query: *

Depends on if your gateway is mgcp or H323. If it is mgcp then no you can't but you have options if you have a H323 gateway.

First thing is SIP image looks fine. Did you manually configure your ip phone with a ip and TFTP server address? If not then you will also need a dhcp server that gives the phone an ip and then points it to the tftp server.

mgcp bind control source-interface FastEthernet0/0 mgcp bind media source-interface FastEthernet0/0 These are the commands.

Basically you need to delete the command ccm-manager config from your configuration. This command will automatically configure the PRI for a full 24 channels. After your configuration is complete take away the command and write it. Next time mgcp bounces the fractional PRI will still be on...

You are right...I was thinking Exchange 2K7.

Nice thought MJ6. Good idea!! This would be a quick and easy way to get the message out to all.

First thing, unity 4.x does not support 2K3 Exchange. Second thing is are you talking about a call handler? Going on this assumtption then have you verified the call is coming in the gateway correctly? thirdly, if the call is hitting the gateway, do you have a CTI RP set up to forward all...

I was pretty sure about this, just had to find a link. Unity 4.x does not support exchange 2007. Had an issue where a customer upgraded their exchange to 2007 and VM no longer worked. Workaround was to stay with 2003 and forward the emails from the 2003 box to the 07 box. Link...

GUI is different on both. Many more features in call manager 5. If you were familiar with 4 then five will just be some more features tacked on. Unity connection is the same thing. GUI is different, more features. You dont need exchange with connection because the message store is on-box as...

I actually have the one you mention Configuring CallManager and Unity: A Step-by-Step Guide, By David Bateman., Published: Jun 7, 2005 This is all related to CCM 4.X and Unity 4.X. No CCM 5 or Unity connection. A lot of the underlining topics are in there, and it is a good book to have...

Try this link. its more geared to 3.3 http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/3_3_2/ccmsrva/sacar1.html#wp1041050 Your users for CDR are in the global directory. I would try to do a search for something CDR related (maybe you will get lucky) If you do find something you...

Are you logging into CDR as an administrator? you can only run these queries as an admin.

You might want to look into CDR. What version of CCM do you have? http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/5_0_1/car/carprf.html CDR does exactly what you are asking and it comes included with CCM.

Do you have a dial-peer for mgcp on the router for that voice port? do a sho mgcp end and see if the fxo in question is listed.

You have done everything I would have. How about resetting the phone factory defaults and then adding it back in to ccm?

Check this link out.... http://www.cisco.com/warp/public/788/AVVID/adding_unity_subscriber.html#p4

Seeing that your Gateways are H323 and call processing is done on the device itself, i would not see an issue here.

I found this link http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008009428e.shtml This just says various versions of 12.2.

Are your gateways MGCP or H323?

http://www.cisco.com/warp/public/788/AVVID/vg200_cfg.html Check this link