Search results for query: *

no change. Still will not boot.

Yes a card for removable backups. Will try that.

Noticed my CPU 1 is disabled and not responding status. I split the cores and tried to restart the disabled cpu. The CF led is flashing on the disabled core. I assume that means the compact flash on the CPU card is corrupt? ANy help would be appreciated.

option 81. No alarms. It has done this several times with a restart of the affected core usually correcting the issue.

Noticed my CPU 1 is disabled and not responding status. I split the cores and tried to restart the disabled cpu. The CF led is flashing on the disabled core. I assume that means the compact flash on the CPU card is corrupt? ANy help would be appreciated.

Yes media gateway cards. Are you thinking a patch on the sig servers? We havent mad any config changes to the pbx.

I have a main site with an Option 81 with sig servers and NRs. We have 1000M sites that connect over sip thru theoption 81. When users are making SIP calls the 1000m sites will not release the virtual trunks after calls are completed on the 1000m side which is causing all trunks to fill up...

Thanks for all the help folks. We did manage to isolate the problem to ports 24-31 on the media card at the option 61 site. With those ports enabled when a call hit that certain port I could not hear the far end caller. Disabling those ports we were not able to reproduce the problem...

Our phone network is running on its own network and we do not have any QOS parameter set to limit bandwith usage. Any other ideas?

we have a main option 81 with SIP trunks to option 61's. i am having trouble at only one 61 site with one way speech path issues. i just called that site over the sip trunk and established a call with a user. After a few seconds she could no longer hear me. HELP!

I WILL TRY BOTH. THANKS FOR THE HELP

Trying to update firmware version on 3900 sets. When I do >fwvu 4 0 0 0 in load 32 it comes back core firmware 024 flash firmware 087. in ld 32 > fdli 4 0 0 0 system errors out and gives the following: err sdl2110 > OVL436 B-tree read failed for language 0, rrn = 232 OVL448 System message...

thanks folks i will give these a try.

We recently had an Option 61 installed. Users have 3904 set with three call appearences mostly built as MCR keys. When a user is on a call (key 0) and another call comes in on key 1, their own name and number appear on the display instead of the calling parties name and number. Any ideas...

I have a cs1000m system that dials over SIP trunks to a fiber remote hanging off my main site option81c. not always, but sometimes the 1000M site initiates the call and the person at theother cannot hear them. they hang up, re-dial and everything seems to be fine. I was thinking protocol...

not quite sure how to do this

thanks alot that works great!!

I have a user that wants his set to ring two times before it forwards off-net to a cell phone. I tried the RCO changes but thats too many rings. Help anyone?