Search results for query: *

Have you tried taking all of the pci cards etc. out and trying them in a different computer, or running a burn in test with out them in.

Just in time for the Core 2 Duos also :)

Heres what I would do: Disconnect Power Take everything out of the computer except psu, ram, and mobo (ie disconnect drives and agp card, nic card, etc..) Reset the BIOS with the battery taken out or with a jumper. This should reenable your onboard graphics and let you know what is going on with...

Alright I didnt know you could do feature 70 and connect 2 POTS lines together without soft keys. You just transfer hit the second call on hold and hang up. Back to my previous question just so I know, why is it denying the unsupervised conference?? It works fine on my KSU.

Are the calls coming through an Auto Attendant or Custom Call Routing Tree? Are the extension numbers on the phone and the voicemail box the same? And what is the Call foward on busy and no answer set to? Should be the same as feature 985

I have a 0x32 with about 20 pots trunks. The customer wants to accept a call and then dial out in another line and make it an unsupervised conference (basically be an operator). There are 2 ways to do this that I know of.. 1. on the M7310 answer the line press transfer on the soft key and then...

Are you asking how to program a line to be private?? I f you wish to do thast then its under A.Configuration->Trk/LineData->and then under one of the options LineType you have then option of POOLs, Public and Private to XXX (XXX=extension #)

A PRI is roughly 2700 reoccurring monthly vs a BRI which is 45 reoccurring monthly so 12 BRIs= 540 a month. My original plan was to use a PRI until I saw the pricing. This has something to do with the Government contract with the phone company. I think I found out the information to the...

I work on a military base and I'm trying to save some tax dollars by switching some lines over to ISDN BRI from POTS this will save 240 a month per 24 lines.. Heres my question, am I correct that a MICS 6.x can handle 64 lines (32 BRI circuits) using 8 cards between the 0x32 and 2 trunk modules...

Just to let you know this will not change what DNs are associated with what port. So the extension number to port number are still going to be meesed up. The only way to correct it is to figure out what phones were swapped and swap them back (with set relocation on). Or you can do a hard reboot...

I have a MICS 0x32 with a 4.1 XC ROM Cart., 2 analog trunk cards, and 2 6 port fiber cards (one is a combo). 5 trunk Mods with 3 analog trunk cards each, fiber applications module, and 6 station modules. ports are setup as follows : (card1: ports 9-14 card2: 3-8) 3-Application Module 4-Trunk...

DRT to prime is set right and trensfer call back has been set to 6 so it should be longer than voicemail

Hi again another problem.. I had to make a new system (mega) and had no xc roms available but my buildings system had an xc but we only have a midi system. So long story short I manually reprogramed the rom on another ksu with everything the setup the same. When I switched rom cart. I did a...

Ok I have located a rom with the correct version that is on an existing system, with 1 6 port thats not being fully used so no problem with changing it except programing. I have NRU10 and I was hoping I could back it up and then put it back on the other rom hooked up to a different ksu. However...

The card I have been using has 2 parts, MICS NVRAM Cart. and inserted in it there is a card labeled nt7b64yl rel 01 0002, NA-MICS-DR5.0 S/W WI 6.06 Most of the roms I have used are just one piece.

this one threw me for a loop also, just puch ok to the software key. This should just be a prompt to add new features. Let me know if this helps

I believe you can, just use the transfer feature 70 and then the voicemail extension (feature 985) and I think the tree has to be the first in order for it to work. I know when a user has no voicemail set up and you forward to the vmail extension it will goto the tree.

I have been having problems with an installation of a 0x32 fully expanded system: 0x32,5-12x0 modules,5-0x16 modules,and an App. Module the 0x32 and trunk modules have loop start trunk cards in all of the slots, and the 0x32 has a combo card and a regular 6 port fiber card, the rom is a dr 5.0...