Search results for query: *

Seen this happen a couple times in the past and we found that it was due to the caller was on a wireless phone and besides the connection via their own line, their phone was on the same channel as a neighbor and initiated an outbound call on that line as well. Good luck!

If your PN are IP connected, then make sure you have Medpro resources in each port network

Your ANI should be passed to your PG via your ASAI connection, which would either be from your AES server or MAPD.

We had the same issues. Our internal firewalls were suspected as the reason why. Go to page 2 of the station forms and change the Direct IP-IP Audio Connections from y to n. That cleared it up for us.

You will find that you can still use FAC for the Auto-In and the light will illuminate on the greyed out button, so if you program an autodial button or speeddial for the FAC on and abbreviated dial list, it works just fine. You just need to use 2 buttons instead of 1, becaust the button you...

I am trying to use IP trunking between two sites for my BSR status polling and continue to fail. Traces show Bad response from poll on the sending end. The receiving end shows a normal trace on the vector. The trunking UUI IE is set to shared and we have tried numerous variations of other...

When I looked at every other firmware update that I had downloaded recently, they were all lower case, but for some reason, that was not the case with this one - TN2602AP-f31-sig.bin. The first couple of times, I entered it as tn2602ap-... and got the same errors you described. Good luck!

I just did the firmware updates on a number of our TN 2602 boards to FW31 and I had the same thing happen. FTP was no problem and file was there on the board. What I found is that on the firmware download form, you have to use the same case as the file name, and once I did that, all was OK.

Thanks for the help. It is a little early to tell yet. Our TN2602 boards were all V24 and I updated them to V31 two nights ago. So far, no new complaints. We do have a renegade TN2302 HW3 FW94 in the same network region, but we really don't need those DSP resources there now, so I will work...

We are in the process of converting all of our remote DS1C connected EPNs at 3 major sites to S8500 and S8300 ESS/LSP. We have found that the faxing that worked with no issues prior to the upgrades now works with intermittent failures. We changed the IP Codec page 2 config from Relay to...

Get with your Avaya account rep and have them price out supervisor paging for you - it is an add on that requires PSO involvement. We have activated it at one our our sites and it seems to be working fine.

We all pay a negotiated price per TDM port per month for maintenance. The question has come up as we migrate from TDM to IP whether we pay the same pricing for IP ports. There is a concern that we may automatically pay the per port maintenance price for the 320 ports on the TN 2602 Medpro...