Search results for query: *

1) Create a vector + vdn for going to voicemailbox of extension 2401. 2) Create a coverpath with this vdn for station 8101

mrjedi, We use Cisco 3750-48p PoE switches with a 4610SW on each port. No problem!

GENERAL STATUS Administered Type: 4610 Service State: in-service/on-hook Connected Type: 4610 TCP Signal Status: connected Extension: xxxx Port: S01032 Parameter Download: complete Call Parked? no...

Same problem when calling inside with "inside" parameter = "y" SenAllCalls can't be activated while it isn't programmed. If I set "DND/SAC/Goto Cover" to "y" then, when actived, the call goes to the announcement.

p08757, It doesn't say much, because the station stays ringing Here's the trace: 17:55:02 Calling party trunk-group 1 member 1 cid 0xde4 17:55:02 Calling Number & Name xxxxxxxx NO-CPName 17:55:02 dial xxxx 17:55:02 ring station xxxx cid 0xde4 17:55:02 G711A ss:off...

We tested with this: Number: 5 Name: test ______START_______ _______END________ Month Day Hour Min Month...

We tried to use holiday coverage, but it wasn't working. Voice System name: XXXXX - COVERAGE PATH Coverage Path Number: 1...

Also, names starting with a "," (example: ", FAX machine") will not be in the directory list.

Our problem is solved! When a W2K3 DHCP server is connected on a PC/Phone Trunk port then dhcp will not work!!! (This is not a problem for W2K DHCP servers) Our former config of the server port on the Cisco 3560 switch : interface FastEthernet0/3 description *** SERVER *** switchport access...

We have the same problem after swapping the W2K server with 2003 in one of our offices. (access switch = cisco 3560) Although in our main office we swapped the dhcp server without any problem (access switch = 2950) Who did have the same problem and found the solution?

Maybe applicable for your situation : You can simply forward the extension to an announcement. e.g. "This number in no longer in use.... please call...

For reset to factory settings: hit hold (red button) and then 73738(reset)and then #.

If you decide to work with a basic hunt group, then you can use feature button aux-work (grp: hunt-group-number) to set the extension in or out the hunt group

When calling MM we see "Msgserver cover".

Is it possible to disable text-to-speech for the spoken name? If yes, how then?

We have the clarisys I750 in use. The quality is very good. With the integrator plugin, it is very user friendly. We also tested Plantronics DSP-400, and agree that also this one has a good quality. In general, I would recommend to always use headset or handset with USB interface. This way...

Hi, We had a demo GN9120 (Flex Boom) for test. And It worked fine on 4620 stations.

Great Ava88 !! This is the solution. I've defined a button aux-work grp:... This is exactly where I was searching for.

Ok, So I have two options: 1) Using send-calls 2) Logging in with different extension with different profiles... Thank you all for the info and ideas!

Hello, ACD = y I suppose you want to suggest to work with agents. But the answer is ... NO ! So, is it possible to log in or out a hunt group without call center functionality (agents)?