Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: bsmo
  • Order by date
  1. bsmo

    Asterisk To Small Office SIP VM issue

    Yes, I configured a SIP URI on the SIP Line with as local URI '40'. Next in the incoming call route I route '40' to the VM module.
  2. bsmo

    Asterisk To Small Office SIP VM issue

    Hello, I'm trying to setup my SOE in combination with Asterisk SIP trunks. Everything is working great except one thing. I'm unable to send incoming calls to a VM Pro module. Is there specific configuration required for this ? I just put in the incoming call route a destination as...
  3. bsmo

    G700/S8300 Design, Is this normal? 3-G700/5-DS1's!

    Please note that you cannot share resources between media gateways. There is no common backplane. If you are using no compression (G.711) you can have up to 2 E1/T1 in one G700 unless you add a MM760 which provides you with another 64 DSP resources.
  4. bsmo

    Non-Avaya IP Phones

    Hmmm, I remember that you could add a phone of type 'h.323' but the problem with applications like netmeeting was that you couldn't enter a pincode which was required by the definity. So yes I you should be able to add a h323 station but registering is something else...
  5. bsmo

    dumb question how do change phone on a S8300?

    Log off the phone, then you should be able to change the type.
  6. bsmo

    Call recording and Ofcom regulations

    Hello, Since you are talking about VDNs and vector I quess you are using an Avaya CM. If you are refreshing your voice system I also suppose you're at least on CM 3.1 ? In that case you could use vector variables to achieve this and just create diffferent vdn's all pointing to the same vector.
  7. bsmo

    Voicemail hunt-group is busy

    moev99, What does a 'status trunk' say ? The IP address of the Audix is different of the procr one. You should go to the maintenance webpage, select 'configure server' and go thru all the settings. On the page were you define the IP for the S8300 there should be also a field where you put the...
  8. bsmo

    G700 Static

    Are the users using digital phones ? Is the G700 grounded ? It depends how the call enters your system and were the recording takes places if you will hear something on the recording or not.
  9. bsmo

    IPO Thoughts?

    intrigrant, It depends from config to config. Sometimes a CM is even cheaper then an IPO. And to be honest for 10 sites I would prefer real centralised management (one system) instead of being able to reach 10 different systems over the network.
  10. bsmo

    Accessing Switch Data and CMS Tables from MSAccess

    learn2shoot, This is certainly possible. You can access the historical tables by installing the Informix ODBC driver on your pc.
  11. bsmo

    C-Lan load balancing

    What's the priority of every card and and are they allowed to accept ip phone registrations ?
  12. bsmo

    IP Audio Hairpinning

    randyb19, Sorry but you are wrong. You are referring to shuffling (ip-ip direct audio) which under normal circumstances should be on 'Y'. But be carefull, there are reasons you would put this on 'N'. For example if you are using a voice recorder that is sniffing the medpro port instead of using...
  13. bsmo

    SIP: Unauthorized message cant register?

    Make sure your sipdomain doesn't include a hostname. So 'avaya.com' would be valid, 'support.avaya.com' NOT.
  14. bsmo

    Digital Crosstalk??

    I would advise you to use other building cabling. Try to repatch the extensions reporting problems to other outlets.
  15. bsmo

    Cisco 7961 connected to SES and working (but no MWI)

    jphardy, Did you put the MWI parameter in the settings file ?
  16. bsmo

    4.0 LSP problem

    Is dadmin enabled in the LSP license ?
  17. bsmo

    SES 3.1.1 call setup problem

    Did you configure the proxy selection route pattern on the locations form ?
  18. bsmo

    loading CM for the first time .....

    Indeed, same effect when you install a S8500 or S8700 with the flash drive connected.
  19. bsmo

    max C-Lans in an Region

    Peter, No, the phones support up to 30 gatekeepers (clans + lsps).
  20. bsmo

    max C-Lans in an Region

    Peter, I don't think there is a limit on the number of clans you can put in one region. But the phones are limited to receiving up to 30 alternate gatekeepers when registering. Anyway putting so many clans in one region doesn't give you much granularity to control registration. Why would you...

Part and Inventory Search

Back
Top