Hi!
Trying to connect Avaya IP Office 9.0 (v1) to Panasonic TDA 100 with IP-GW4(TDA0484) card installed.
We have a problem with routing calls from Avaya to Panasonic.
When dialing pressing digits on keypad, call is established
When pressing redial button, call is not established...
Hi! amriddle01
Your the answer that it's not possible is ok. It's not about "the better way". It's about the only way.
If so, I'll do as you said.
Thanks you :)
I now have time profiles that use the same VM, but different fallbacks (secretary day/security night). I don't want to duplicate this to script. It's harder to support.
No solution really? All the advice are about why I shouldn't do that way but no advice how to do what I want :(
Hi!
I have this now. Timeout --> Call to Secretary HuntGroup
I want it to go to Fallback Extension described in "Incoming Call Route"
So I could use the same script for different Incomint Call Routes going to different FallBack Extensions.
As Embedded AA does.
Hardcoded into VMPro's script.
I want the script to stay unchanged but to fallback to different extensions based on incoming calling route rules (time, called number, etc)
Hello.
If I use Embedded VM, then if user doesnt't dial a number, then call goes to fallback extension (group)
Which mechanism should I use to achieve same results with VM Pro?
---
Situation:
I have Incoming call routing that assigns call to VM Pro. If user doesn't dial exnension, then on...
Hi! Problem solved.
These these phones were configured with static IPs.
The day problem appeared, new devices with the same (conflicting) IP addresses appeared in the network.
So, reset and return to DHCP method worked.
Changing static IPs also worked.
Strange that no clear message appeared...
Hi!
Suddenly normally working 1608-i started to show this at boot:
>=D;8:B 06@5A0
*to program
What should I do?
Phone photo is attachedhttp://files.engineering.com/getfile.aspx?folder=65cb1c02-04c7-4155-8509-6c9c0bda8477&file=IMG_20160720_093710-1.jpg
I'm looking for "ignore" button for one call.
This is how you can no-answer one call on mobile - just select hangup, without throwing phone to bucket or setting DND :)
The question if from CEO's assistant that wants to receive only important calls sometimes
Hello!
We've got
Avaya IPO 500 v1 9.0
IP DECT r4 (IPBS2[7.2.14], Hardware[IPBS2-C4/1B1])
Avaya DECT 3725 phone
If I call to 3725 station, and user presses hangup button, call reappears in second.
To reject you should answer and hangup.
Users ask how can they reject call without answering it...
Hi Joe, Okki!
Do you believe SCN will solve my problem with Direct Media Path?
I will have much work to change links to SCN (renumbering of ~500 users with Auto Attendants etc), this planned for end-of-year with much testing
--
Alexey
Hi!
R9:
System settings g.729, g711a, g711u, g723
All lines and extensions default to system
R7:
System allows only select one codec in Automatic Codec Preferrence: g729 is selected
Compression mode in line setting is set to "Automatic Selection"
By the way, codecs match, as there's RTP...
> You do not use SCN?
Different versions (docs say there should be same versions)
Same nubmering on different PBX (sovled by prefixes now).
I have plans for SCN, but not very soon.
--
Alexey
Hi folks!
I've got several bigger offices with IP Office installed and several smaller with phones connected to nearest IP Office.
All offices connected via VPN one to another (DMVPN, full mesh).
Direct Media Path enabled everywhere (h.323 trunks (not SCN), on extensions).
When I call from R9...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.