Search results for query: *

Hi All. I have installed Callpilot 4 with CS1000/61c Rls 4.5. I never setuped fax option on Callpilot, Just wants to know some tips or some brief steps to setup Fax messaging through callpilot 4.0. I know how to create applications/mailboxes/SDN but dont know Fax. What field are necessary in...

Mohd u shud check first wat John is saying then check MU/A Law settings in Parm data and LD 97, INTN prompt also.

U can also check tor STEP prompt in urs RDB, may be its pointing to other route. Most probably u have other Tn besides 2 built by urself having no PSTN line connected.

U can also use OCBA class of services to block ext to ext dialing

Hi Big, lets say i set OVLL/FLEN to 4, then when it would out digits i mean AC1+SPN+xxxxxxxxxx, Does it counts digits from AC1

john i am using AC2+SPN+RLI+DMI, need to put a delay between digits , e.g 91234+delay+00820374775757---> Does overlap csignalling put a delay?? i mean if i play with OVLT/OVLL regards

Hi. How can i implement Overlap signalling on ISDN PRI besides Enbloc? I need to put a delay between some dialout digits on ISDN PRI. PBX is CS1000 RLS 4.0

Can Somebody guide me briefly what is SIP trunk and H.232 and difference between them Thank you

Hi all i cant get login into my PBX, it is 11c rls 25.40, i am getting TTY 0 OVL 111 on my maintenance terminal, Any help how do i get in?

John does it also ring on Key 5 if any of these dial eachother???I dont wants key 0 to get ring

Hi all, Need some assistance fro setting some direct call. Boss have a separate analog set, Secretary have M3904 set with Key module, Now boss need that if he dial "0" then call would appear on a Key on Key module (Not on Scr key of secretary), it could be any key on key module and like wise...

Hi all, Pbx is 61c Rls 4.5, I have a extension 223 with Mail box, i need to setup MWI 2nd Dn, i mean when a message saves into 223 then its indication MWA light should also be shown on extension 225, note that ext 225 also have its own mailbox. It is CallPilot 4.0 regards

Hi i have 3 different routes of COT lines, i am getting dial out problem on these (Tgar/ncos are fine),its been happening with mobile dial mostly, when i dial any mobile no i get an error tone or a short beep and some times it gets through ok, it is random with all routes, i checked tgar/ncos...

What error would i get if i do this?

Hi all, I have image CD of callpilot 4. can i restore this image on callpilot 3 (i have a site with callpilot 3.0, this callpilot harddisk got crashed and i dont have any CD of images or other callpilot 3 software at this site), Does it work??? or gave some ID or dongle error??? can i do some...

John no need of DCH in DTI TIE, It is a TIE using PRI card as DTI. My route programming is TYPE RDB CUST 00 ROUT 20 DES TIE TKTP TIE NPID_TBL_NUM 0 ESN NO RPA NO CNVT NO SAT NO RCLS EXT VTRK NO NODE DTRK YES DGTP DTI2 ISDN NO DSEL VOD PTYP DTT AUTO NO DNIS NO ICOG IAO SRCH RRB TRMB YES...

Hi. I am getting a continue Loop/Cont test on my maintenance terminal.It was started when system automatically shifted to batteries/DC supply after a power outage for a minute, during power outage system was working ok on batteries. How can i stop these series of test on my maintenance...

Both sides clock are locked to there DTI card loop. There is no master/slave or Net/Usr setting in mine DTI programming, I mean it isnt prompted for SIDE.

Hi, I am having issue with DTI different channels(Not all) lock out problem, I m using default PAD/ABCD/LPTI values, The system is tied with another 11c PBX. PBX clocking is fine i checked it with another CC card by replacing it. PBX rls is 4.5 and other site PBX rls is 25.40.