Two way call

[zulu69]

Hi all, Need some assistance fro setting some direct call. Boss have a separate analog set, Secretary have M3904 set with Key module, Now boss need that if he dial "0" then call would appear on a Key on Key module (Not on Scr key of secretary), it could be any key on key module and like wise when Secretary press the same key (On which boss call appear) then a ring should got to boss set(not ring or buzz only they shud both be able to talk each other normally).
Any help in this?
Regards

 

[notme11]

try a hot dial key in the intercom, I doubt it will be dial 0, it will have to be something else a 2 digit code, it will have to be programmed on both phones and they each will have to know the others 2 digit code to be able to make the connection.

 

[johnpoole]

two way hot dial.. set 1

key 5 hot d 4 1000 2000

set 2, key 5 hot d 4 2000 1000..

1000 and 2000 can be any two vacant numbers.. and you can use any key.. if your going to use an analog.. the analog will only rec calls not make calls..

for analog, cls mnl then ftr hot d 4 1000 2000.. the he could be called or calls could be transfered

john poole
bellsouth business
columbia,sc

 

[acewarlock]

Your Boss is trying to make a $10 phone do what a $100 can do.

 

[zulu69]

John does it also ring on Key 5 if any of these dial eachother???I dont wants key 0 to get ring