The building took a power bump and the NAM and the Mics Rebooted. The Mics came back up but the NAM did not. I rebooted the NAM and the MICS. The MICS came up but the NAM did not. I did not hear the tones on the NAM and the display behind the door displays 00. On the monitor it shows the...
When I do Feature 915 I get inactive feature.
Feature 983, 981, and 982 works fine and all of the other feature codes are ok. Any suggestions.
P.S. I also tried 916,917,918,919,and so on with no luck.
Thanks for everyones help. By making these changes the PRI registed.
ccm-manager mgcp
ccm-manager config server 10.34.160.11
ccm-manager config
Thanks Richard
The flash card is corrupted .Thanks for everyones help.I remembered I had an older Flash card from an upgrade and tryed it and it worked.
Thanks for everyones help
Richard
I hyper terminaled into the Flash 2.0 :
NVRam Test: Passed
B84test: Passed
Program ROM: Failed Alarm Code: 01E
Base Alarm 01E: Corrupt Program ROM. Halt
I removed a CICS with 4.2 software with 2 digit DN's. It had a Flash Voice Mail with 2.0 software connected to it. Then I replaced it with a MICS 0x32 with 6.1 software with 3 digit DN's. Then I connected the Flash Voice Mail with 2.0 software to it.Then I went through the reinstall procedure...
I'm going to be swapping out a CICS 8x24 with 4.1 software with a MICS 0x32 with 6.1 software. The CICS has a StarTalk Flash with 2.0 sftware connected it. Is the StarTalk Flash with 2.0 software compatable with the MICS with 6.1 software.
I'm replacing a CICS with 2 digit DNs connected to a StarTalk Flash with a MICS 0x32 with 3 digit DNs. Will I have to reprogram the StarTalk Flash or will it automatically detect the 3 digit DN programming.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.