We had this problem. Have you sniffed the network. We had huge number of retransmissions.
Solution was upgrading the software on the 5510 to 4.1 and resetting to factory defaults. Then add any vlan or other stuff.
I recommend that you upgrade the entire stack to the latest version. This can be done by setting the switch on the cascade module of one of the working switches to make it the base, then connecting by telnet and uploading the new versions of the image and diag to the switch. Do the same for the...
PHKL
First please look at this thread.
http://www.tek-tips.com//viewthread.cfm?spid=585&newpid=585&sqid=86974&CFID=86493646&CFTOKEN=15301286
It might answer your questions. If not then please post the exact information that you entered on the setup page of the router.
Bill
You have a number of options. You should be able to configure the branch 2630 to default gateway to the main office. Then have the main office default gateway to the DSL router. This will work. You will have to make sure that the leg of your main office router is on the subnet that the dsl...
For working with Bezeq in Israel.
You need to download the latest 1.42.7 firmware from linksys.
Then restore factory defaults from the password page.
Go to the setup page and select PPTP as the wan type.
Enter the IP address that Bezek gave you and the netmask.
Put 10.0.0.138 as your default...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.