Search results for query: *

I was wondering if any one has attempted this integration yet, CS1KE 7.5 with System/Session Manager customer will be replacing the Octel VM with a Cisco Unity VM. I find no documentation on Avaya website that indicates this has ever been compatibility tested. But was wondering if anyone has run...

Just one other tid bit also, watch loading SP7 on SMGR if you are running SMGR HA you have to take it out of HA mode and patch individually to patch the secondary HA SMGR use: Log into the remote DOM0 IP for the backup server Then: xm list - shows running systems xm console udom – lets...

Yeah I have the same issue with Corp directory everything is manual as far as getting updates in to corp directory and Avaya stands on the design intent ticket. Fritz, no the sites I have had issues with are COTS very large systems sometimes I think that it is System Manager getting busy or not...

I have had several Avaya cases opened about EM and System manager they keep giving me a blow off answer that the Primary and Back UCM servers need to be rebuilt from scratch and nor demoted to memeber servers. I fixed one system that could not got o EM or to the NRS by un-deploying then...

yes in in CFN, II would increase the CR's, verything that prints in the system use CR's bugs.aud's, err's, DCH messeging prints at 9600 baud at best but the DCH is working at 64k so it could eat up 80 CR's in a heartbeat Not sure what you have programmed in the system I go by the method of...

is this an OPT11C, if so check the NCR's in the system DCH messaging that is heavey can back up the CR's in the print queue hen you would not have a CR for the voice call

You could also try backing ou the XSM in that column if the green led is out, do you have a cabinet alarm?

I'm sorry I misunderstood I thought you were moving the programming, moving the set to and new loacation and re cross connecting can be done as Scott M described

If you have access to the Nortel Partner Information Center (PIC) go get PB 2001_097 this will detail when and where the MOV command is acceptable to use.

You could try dialing the route access code for route 50 see if you get fast busy or silence etc.... you may need to change the TARG on the route or TGAR on the set to be allowed to dial the ACOD. I would think that if you get fast busy there could be a problem with the wiring or the XUT unit

Not sure if anyone is still interested but you could use LD 77 turn on the DMTN monitor on a TN then use a MIK key on another set to turn the MWI light on capture the SSD messages then use the MCK key to turn the light off then you could possibly use a TAPI interface to create the SSD messages...